Renovation of an educational facility in Fort Collins, Colorado. Completed plans call for the renovation of a educational facility.

Reference Number 0000361579 Colorado State University, Department of Facilities Management invites firm, competitive documented quote responses from qualified vendors/contractors to provide labor, materials, equipment, and services for the following scope of work listed below at the Colorado State University District Cooling Plant #2, 204 W. Lake St., Fort Collins, CO 80528 Scope of Work: Remove and Replace Fill Media in Two (2) Cells of One (1) Cooling Tower Seam Coat Cold Water Basin and Seam Seal Hot Water Box in Two (2) Cells of One (1) Cooling Tower Scope of Work Detail: Vendor will be responsible for providing all materials, equipment, labor, and services necessary to perform the Cooling Tower Fill Replacement on Cooling Tower BAC Model 31056. Remove and Replace Fill Media Seam Coat Cold Water Basin and Seal Hot Water Box Perform OSHA lock-out/tag-out on all electrical with the building mechanical engineer or the site contact person Remove existing factory fill media and hardware from cooling tower and dispose of Mechanically clean cold-water basins and hot water box to remove all dirt and debris Clean prepared cold-water basin and hot water box areas with degreaser Apply new caulking to seams of hot water box Apply epoxy coating, approximately 10 ml thick along cold water basin seams 6" wide (Note: coating may take up to 24 hours to cure) Install new BAC factory OEM fill kit and hardware Complete thorough site clean-up Remove any LOTO Return the tower to normal operation Question Deadline 09/03/2024 at 12:00 PM MT Questions are submitted online No, All questions pertaining to this solicitation must be submitted in writing by to g.trujillomartinez@colostate.edu. CSU reserves the right to schedule separate a Freight Carrier if the cost is advantageous to the University