Site work and paving for a road / highway in Fayetteville, Georgia. Completed plans call for site work for a road / highway; and for paving for a road / highway.

For an annual asphalt milling contract Fayette County is soliciting bids from contractors to provide asphalt milling services on various County roads at locations within Fayette County. The contract resulting from this invitation to bid will allow Fayette County to obtain asphalt milling services on an as-needed basis throughout the contract period. Two types of milling projects are anticipated: PRIMARY WORK: Milling for patching: This work involves milling sections of road to facilitate patching. Typically, this milling is 2" to 4" in depth but may be greater if conditions warrant. Millings will be hauled away by County trucks or County Leased Trucks. Patching will immediately follow milling operations and will be performed by County staff. ADDITIONAL WORK: Street milling: This milling work is done inside residential subdivisions on curbed streets. Milling will typically be for the purpose of removing excess asphalt above the curb line prior to resurfacing and/or to improve the crown of the street. The work may include limited areas that need to be milled for patching. This work will be variable depth milling but generally 1"- 3.5" in depth. The intent is to have the final milled surface to be approximately 1.5 inches below the curb line. The County will be responsible for providing the clean-up. Millings will be hauled away by County trucks. In most cases, the County will immediately follow the milling operations with an asphalt overlay. It is undesirable for the milling contractor to be significantly ahead of the County's work progress. The scheduling of milling operations is an important part of this work. The County will inspect the work periodically as it progresses.