Privately Funded
Bidding Soon
Documents Available
Publicly Funded
Addenda Available
Post-Bid
Saving Project...
Renovation of a military facility in Kansas City, Missouri. Completed plans call for the renovation of a military facility.
This is a combined synopsis/solicitation for commercial items prepared in accordance with (IAW) the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The Government intends to use the procedures in FAR Part 13, Simplified Acquisitions Procedures and FAR Part 12, Commercial Items. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This notice is hereby issued as RFQ No. 142082-24-145. This is a Request for Quotation (RFQ) and incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2024-07, Commerce Acquisition Regulations (CAR) and NOAA Acquisition Manual version 2024-3. This is set-aside 100% for a Small Business. The requirement's North American Industrial Classification System (NAICS) code is 811210 Electronic and Precision Equipment Repair and Maintenance; the corresponding size standard is $34.0M. The resultant Purchase Order (PO) will be a firm-fixed price PO. Interested parties are responsible for monitoring this site to ensure they have the most up to date information about this acquisition. No partial quotes will be considered. No partial awards will be made. The U.S. Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Weather Service (NWS), National Reconditioning Center (NRC) intends to send out for the repair and reconditioning the following equipment: 28 each Motor, DC Servo, NWS/ROC PN: 2200220-201, ASN: R400-2A1A1B1. Prospective vendors must be able to demonstrate their ability to complete this requirement for the equipment listed. The intended acquisition is for the above services to furnish labor and material to place in like new operating condition and good appearance to meet the original manufacturer's specifications and/or tolerances of the equipment listed above. After work is completed, if the equipment does not meet these conditions, it will be returned to the vendor for rework at no additional cost to the government. If applicable, one each first article motor shall be provided within 60 calendar days ARO for inspection and acceptance by NRC's Quality Control (QC) Unit before being given "Notice to proceed" from the Contracting Officer for repair and reconditioning of the remaining units. The vendor is responsible for returning repaired product(s) in a shipping container designed to withstand the vibration and shock encountered during transportation by ship, rail, truck, and aircraft. The unit(s) shall be packaged to prevent damage to include: physical, electrical, mechanical, cosmetic, and the unit(s) shall not be damaged or lose performance capability. Only firms that can provide the exact services described herein will be considered responsive to this notice. The FAR & CAR provisions incorporated into this acquisition are in attachment labeled "FAR and CAR Provisions attached to service Solicitations". The FAR & CAR clauses incorporated into this acquisition are in attachment labeled "FAR and CAR Clauses attached to service Contracts". The NOAA Acquisition Manual provisions and clauses incorporated into this acquisition are in attachment labeled, "NOAA Acquisition Manual for service Solicitation and Contracts" Evaluation Factors CAR 1352.213-70 Evaluation Utilizing Simplified Acquisition Procedures (APR 2010) The Government intends to issue a Purchase Order (PO) resulting from this Request For Quotation (RFQ) to the compliant and responsible quoter whose quote results in the best value to the Government, considering both price and non-price factors utilizing a comparative evaluation pursuant to FAR 13.106-2(b)(3). "Best value" means the expected outcome of an acquisition that, in the Government's estimation, provides the greatest overall benefit in response to the requirement. All evaluation factors other than cost or price, when combined, are slightly more important than cost or price. Each response must at least at a minimum meet the solicitation requirements. The Government reserves the right not to award a PO for this requirement. The following factors will be used to evaluate quotations: Past Performance: The offeror shall provide evidence of their ability to complete the repair and reconditioning of the equipment IAW the specifications and requirements listed in the Statement of Work (SOW) and ROC/NWS Specification Drawing 2200220-K within the past 3 years on related PO's even if not with a Federal Agency. These will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of all goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction. Quoters must provide a list of NO MORE than three (3) references to whom the same or similar equipment has been repaired and reconditioned. The quoter must include the reference's company name, company address, contact person's name, valid phone number and email address and detailed contract information including contract number, quantity, price and date of completion or current status of work. Evaluation of past performance shall be based on the references provided, the Quoters recent and relevant procurement history with NOAA or its affiliates and/or any other available source of information available to the Government. A Past Performance Questionnaire (PPQ) may be sent by the Government, at its sole discretion, to the past performance references if deemed necessary. Data from the Past Performance Information Retrieval System (PPIRS) and/or any other available source of information, may be used at the Government's discretion to supplement the references provided. Past performance of a similar scope, magnitude and complexity that demonstrates a minimum finding of satisfactory or higher by all considered sources will be found technically acceptable; however, past performance reports indicating greater than satisfactory may be deemed a better value to the Government. See attached Evaluation Factors. Technical Approach: The quoter will be evaluated on how they intend to organize, staff and manage the contract and the means that will be used to accomplish the contract requirements, through the evaluation of the following sub factors (a through d) If applicable, one each first article motor shall be provided within 60 calendar days ARO for inspection and acceptance by NRC's QC Unit before being given "Notice to proceed" from the Contracting Officer for repair and reconditioning of the remaining units. Provide evidence you can meet this delivery of the first article. Specifically state the warranty on all repairs and reconditioning of the repaired equipment. The warranty shall be based on the date of acceptance by NRCs QC unit. The longer the duration of the warranty, NWS shall look upon them more favorably. Explanation of technical capabilities and qualifications to meet the requirements of the resulting PO. The greater the technical capabilities and qualifications, NWS shall look upon them more favorably. Provide a detailed production preparation schedule. The more detailed the schedule; NWS shall look upon it more favorably. Delivery Terms: The offeror's quoted delivery terms will be evaluated. Provide a detailed production plan for the repair and reconditioning of the equipment including delivery timeframe (X weeks after the contractor's receipt of a signed PO). The more detailed the plan; NWS shall look upon it more favorably. The sooner the equipment can be returned as well as pass acceptance by NRCs QC unit as meeting the requirements the better. Faster/earlier delivery terms will be evaluated more favorably but you shall be required to meet these delivery terms. Price: The offeror's quoted price shall be all-inclusive firm fixed pricing, including return shipping costs, if applicable, IAW the specifications and requirements listed in the SOW and drawing for the listed equipment for this RFQ. After repairing and reconditioning, if the equipment does not meet these conditions, it will be returned to the vendor for rework at no additional cost to the government. Place of Acceptance is: National Reconditioning Center, 14200 Merritt Rd, Grandview, MO 64030. The Government will evaluate offers for award purposes by adding the total price for all lines which will include return shipping and any discount terms. Addendum to FAR provision 52.212-1 Instructions to Offerors - Commercial Items The offeror MUST submit all of the following information with their quote package in order to be considered compliant to this RFQ. Must address all factors and sub-factors listed above under Evaluation Factors CAR 1352.213-70 Evaluation Utilizing Simplified Acquisition Procedures. Quote shall be in writing and valid for at least 30 calendar days from the closing of this posting. Include the expiration date on quote. Quote shall also include the following information: Company name and address, Unique Entity ID and associated CAGE code, Point of Contact with email address and telephone number. Also include in your quote: pricing which shall be inclusive of all costs including return shipping costs and product description for the line item listed above IAW the specifications listed. Delivery terms for the return to our facility of the repaired and reconditioned equipment. Complete, sign, date and attach if in agreement with the attached FAR provision 52.222-48 for this requirement. Your response to CAR clause 1352.209-74, Organizational Conflict of Interest - Warrant and Disclosure, attached. In order to be considered for award, you must submit a quote IAW the requirements listed above. If you do not submit all of the requested items you may be considered non-compliant. ***PLEASE SUBMIT ONLY THE INFORMATION REQUESTED ABOVE. THERE IS NO NEED TO SUBMIT ALL PAGES OF THIS SOLICITATION *** All contractors doing business with the Federal Government must be registered in the System for Award Management (SAM) database. For additional information and to register in SAM free of charge, please access the following website: https://www.sam.gov/ In order to register with SAM and to be eligible to receive an award from this office, all contractors must have an Unique Entity ID. To learn more, access the following website: https://SAM.gov/content/entity-registration Question Submission Interested offeror's shall submit any questions concerning the solicitation at the earliest time possible to enable the Federal Government the Contracting Officer, Margie Sabbagh to respond before the closing of the notice. Questions shall be submitted to the attention of Margie.Sabbaghnoaa.gov. No questions will be answered over the telephone. Quote Submittal Quotes, required information and documents shall be submitted by email to the email address Margie.Sabbaghnoaa.gov no later than, Friday, September 13, 2024 at 3PM CDT. Quotes shall be clearly marked with the Solicitation Number: 142082-24-145, Offeror's are hereby notified that if their quotes are not received by the date, time and location specified in this announcement, it will not be considered by the agency. Telephone quotes will not be considered. THE GOVERNMENT DOES NOT ACCEPT RESPONSIBILITY FOR NON-RECEIPT OF QUOTES. IT IS THE CONTRACTOR'S RESPONSIBILITY TO REQUEST AND RECEIVE A CONFIRMATION OF THE QUOTE RECEIPT.
Post-Bid
Military
$250,000.00
Public - Federal
Renovation
Documents for this project are exclusively Specifications. If Plans become available, we will add them here.
3
Trades Specified
Division 00 - Lorem Ipsum
Find More Local Projects
Within 75 Miles of This Project
One Low Price
- One license and one market
- Details and key contacts on all bidding projects
- Organize your pipeline with a digital bid board
- Automatically match opportunities to your profile
- Saved searches deliver daily project leads to your email inbox
Market Pricing Around
- All Starter Product functionality
- Access to all documents (plans, specifications, and addenda)
- Access to planning projects
- Access to contact information
- Ability to Export
You’ve Reached the Free View Limit
Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.
Come back in [[refresh_days]] to get [[project_count]] more free projects.
September 20, 2024
October 21, 2024
To Be Determined, Kansas City, MO
Related To This Project
Kansas City, MO
Bid Date: Sep 25 2024
Kansas City, MO
Bid Date: Oct 04 2024
Kansas City, MO
Bid Date: Sep 11 2024
Kansas City, MO
Bid Date: Sep 13 2024
Kansas City, MO
--
Kansas City, MO
--
Kansas City, MO
Bid Date: Nov 12 2024
Kansas City, MO
Bid Date: Oct 18 2024
Kansas City, MO
Bid Date: Sep 17 2024
Kansas City, MO
Bid Date: Sep 06 2024
Kansas City, MO
Bid Date: Sep 10 2024
Kansas City, MO
Bid Date: Sep 24 2024
Kansas City, MO
Bid Date: Sep 25 2024
Kansas City, MO
Bid Date: Oct 11 2024
Kansas City, MO
Bid Date: Sep 20 2024
Recently Viewed
--
--
--
--
--
--
--
--
--
--
The best commercial construction data available. Period.
Sign up now to get instant access to project search, five projects and five companies, free.
Get the right
data with Project Intelligence
Project Shared
with
example@example.com
Choose what you would like to do.
Seen enough? Want to see more? Subscribe on your own or talk to one of our sales reps.
What is your business type?
We have a wide variety of products that are purpose built for certain business types.