Site work and paving for a road / highway in Gilbert, Louisiana. Completed plans call for site work for a road / highway; and for paving for a road / highway.

OJT Goal: Trainees Specbook: 2016 Pccp patching and related work Parish(es): Franklin Estimated Construction Cost: $500,000 to $1,000,000 LADOT - Franklin Parish PCCP Patching *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Furnish and construct surfacing for maintenance of traffic on driveways, pipe crossings, short-term traffic on raw embankrnent, slope corrections, or other disturbed roadway sections as directed and in accordance with the following requirements. This work consists offurnishing properly distributed asphalt material followed by a uniform application of aggregate for building a riding surface, improving the surface friction of a roadway, sealing cracks in the roadway, reducing the rate of oxidation of a surface mixture, or as an interlayer to delay or reduce the occurrence ofreflective cracking. Asphalt Surface Treatment (AST), sometimes referred to as chip seal, consists of a specified emulsion applied cold or polymer modified asphalt material applied hot, at the temperature range specified in Table 507-1 for cold applications or Table 507-2 for hot applications, respectively. The application rates of asphalt material and aggregates will vary with aggregate size and existing roadway conditions but, for bid purposes only, shall meet the requirements ofTable 507-1 or Table 507-2. The Project Engineer will review the actual application rates.