Renovation of a detention facility in Manistee, Michigan. Completed plans call for the renovation of a detention facility.

Wi-Fi Cabling Infrastructure - Oaks C.F. All requests or inquiries concerning the Bidding Documents, or the Work must be addressed to Bret Emerson, Commtech Design, bids@commtechdesign.com. Questions will be accepted until September 23rd , 2024, at 3:00 PM ET. The Owner reserves the right to negotiate Unit Prices or contingent Change Order prices set forth herein prior to their possible incorporation into the Contract Documents. o The MDOC is obtaining a new WIFI network system at each facility o The scope of this project is the provision and installation of the cabling, raceway and systems as described below, on the drawings and in the detailed specifications. o Electrical Power o Provide and install power circuits where shown on the electrical drawing and as described in the specifications. o Systems Grounding o Install ground bars and bond equipment to the ground bars as shown on the drawings and as described in the specifications o Wireless network equipment shall include: o Wireless Access points -(WAPS) and their enclosures. Interior and Exterior. o Contractor shall install WAPS and WAP enclosures at each building. Owner will provide the WAPS and Oberon type enclosures. o WIFI cabling scope shall include but not be limited to: o Provide, install, terminate, test and label a complete CAT-6A cabling infrastructure to support a new WIFI (wireless) network. o Provide and install raceways and cable supports as specified and as required to support all new cabling and Wireless Access Points. o Upgrade and/or add communications racks and equipment to the racks. Make change as noted on the drawings and specifications o See drawings and specifications for raceways and pathways. o The contract shall include the installation and connection of Wireless network equipment. Work shall include: o Providing a 40' long Conex box onsite for the duration of the project. Coordinate location with the owner. o Moving of WAPS and enclosures from the delivery truck to the owner's storage building. o Moving of WAPS and enclosures from the owner's storage location to the actual building where they will be installed. o Installation of all wireless network equipment. this includes: Mounting of owner provided WAPS and enclosures in all buildings. Mounting of owner provided WAPS on the building exterior or poles at the site. o Provide and install CAT-6A patch cords at each WAP. See specifications for types and lengths required. o Owner will provide and install CAT-6A patch cords at the Ethernet Switches o Verify connectivity lights on all WAPS after the owner installs the Ethernet Switches. o Label WAP patch panels with the WAP number as shown in the drawings and specifications. o The owners (and their Cisco Partner) work on the WIFI network equipment includes: o Obtaining of Wireless network equipment and storage at their warehouse in Michigan. o Deliver of WAPS and WAP enclosures to the site. o Configuration of all wireless network equipment per owners' recommendations o Labeling of WAPS with WAP number and labeling outside of WAP enclosure with WAP number and building where it is to be installed. A Performance Bond And A Payment Bond Are Required For All Bids Over $50,000.00. Each Bid Must Be Accompanied By A Five (5) Percent Bid Guarantee.