Site work and paving for a sidewalk / parking lot in Spring Valley, New York. Completed plans call for site work for a sidewalk / parking lot; and for paving for a sidewalk / parking lot.

CR Number: 2122566 Contract term: Within 30 days of receiving the purchase order Driveway Replacement. The vendor shall provide all labor and materials necessary to complete the work in a professional manner according to scope of work and architectural drawings if supplied. Work is to be completed within 30 days of award, unless modified below. This is a NYS Public Works project, and prevailing wages are to be paid. Refer to attached specification for the following scope of work. Site must be cleaned, and all materials secured at the end of each work day. Absolutely no scraps, especially fasteners, are to be left unsecured. Upon completion of Driveway Replacement, before removal of equipment and scaffolding, contractor is to schedule a quality control and quality assurance inspection with Plant Superintendent Prevailing Wages: Schedule PRC #: 2025005762 SCOPE OF WORK includes, but is not necessarily limited to the following: 1. The vendor is paving approximately 5,000 sq. feet of paving. 2. Vendor is responsible to verify all measurement. 3. Vendor will remove old driveway completed. 4. Vendor will be required to excavate and grade/ slope the entire area of the driveway as needed. Compacted sub-base (Item#4) at a minimum thickness of six (6) inches is required. 5. The vendor will pave a layer of HMA binder coarse (type 3) at minimum thickness of three (3) inches. 6. The vendor will pave a layer of HMA surface/ top coarse at minimum thickness of two (2) inches. 7. The vendor is responsible for smooth transition/grading of butt joints to roadway, walkway, and connecting driveway. 8. HVDDSO will provide the item# 4 stone and asphalt for this project. 9. The vendor shall provide all required trucking of materials (i.e. Item#4, asphalt) delivered to site, install all materials as required for this project and follow manufacturer's instruction for placement of materials and industry standards.