Site work for a water / sewer project in San Antonio, Texas. Working plans call for site work for a water / sewer project.

This project will be procured through the Request for Competitive Sealed Proposal (RFCSP) alternative construction delivery method and is tentatively scheduled to be advertised Second Quarter 2025. Please submit questions and/or comments by October 2, 2024 at 4:00 PM (CDT). Answers to the questions will be posted to the web site by October 8, 2024 at 5:00 PM (CDT). To obtain additional information about the project, ask questions, or provide comment, contact Janie M. Powell at 210-233-2443 or via email at Janie.Powell@saws.org. The Steven M. Clouse Water Recycling Center (SMCWRC) is the largest of the three (3) wastewater treatment plants SAWS owns and operates, and is located at 3495 Valley Rd. San Antonio, TX 78221. The plant has been in operation since 1987. Estimated construction budget is $100,000,000.00. Estimated advertisement in 2nd quarter of 2025 Estimated Construction start in 3rd Quarter of 2025 This project will expand the capacity of and improve the hydraulics at the secondary treatment area including the Stage 2 aeration basins and settling tanks and will also replace the aeration blowers. The 2050 flows to the facility are projected to be 128 mgd on an average basis and 396 mgd on a peak 2-hr basis. The existing capacity of the Stage 2 aeration basins and settling tanks will be improved to meet the 2050 flow and load requirements. The existing positive displacement blowers will be replaced to meet the current and future air demands for an effective aeration process and improved energy efficiency. The SMCWRC Primary Treatment Expansion Project will address Primary Clarifiers and Stage 1 expansion. The scope of this project includes: Additional Stage 2 aeration basins and settling tanks, and associated piping and sludge collection systems Replacement of the existing process air blowers Upgrades to the electrical and SCADA systems associated aeration systems and blowers/blower building Adequate levels of system automation, controls, and instrumentation to optimize operation and performance; and All associated site civil, mechanical, structural, electrical, and I&C work for these expansion and upgrades The method of Contractor Selection has not been Determined at this time.