Site work for a mixed-use development in Amarillo, Texas. Completed plans call for site work for a educational facility.

Multi-Campus Fencing A Proposal guarantee in the form of a cashier's check, certified check or bid bond, payable to Amarillo ISD, in the amount of 5% of the largest possible total for the Proposal amount submitted, must accompany each Proposal. Multi-Campus Fencing Project The estimated budget for all work is $6,000,000.00 The estimated construction time is 259 calendar days. Scope :- Chair Link Fencing All Chain Link Fencing will be 8' in height. All steel posts shall be 3" terminals and 2 3/8" line posts schedule 40 weight and set in concrete at minimum depth of 4'. Mesh shall be 9 gauge. Top Rail and mid rail shall be schedule 40 with an appropriate gauge of bottom tension wire. There will be 3 styles of openings involved in the chain link scope. 3' 0" x 8' 0" egress gates with panic hardware. This assembly shall be a welded steel frame secured to a 4" 3/8" thick steel tube frame. Frame and door shall be 8' tall to match existing 8' fencing. Appropriate screening to prevent activating the panic device from the exterior shall be included. 3'0" x 8'0" walk through access gate with bulldog hinges and padlock securable gate latches. 8'0" x 10'0" double drive gates. Gates shall incorporate bulldog hinges and drop bar and padlock securable latches. Ameristar Fencing All Ameristar ornamental panel fencing shall be 8' tall Montage II, 3 rail, classic top, extended bottom. There will be 3 styles of openings involved in the Ameristar scope. 3'0" x 8'0" egress style (door) gate with panic hardware. Appropriate screening to eliminate activating the panic device from the exterior. 3'0" x 8'0" standard gate with padlock securable latches. 8'0" x 10'0" double drive swing gates with the drop bar and padlock securable padlock latches. Scale resistant Mini-Mesh chain link All scale resistant mini mesh chain link will be 8'in height with 9 gauge galvanized chain link mesh. Mesh opening shall not exceed %". Poles and framework must have specifications to support increased weight and meet manufacturers' design scope for the mesh. For the 3 styles of openings involved in the Scale Resistant mini mesh chain link. 1. All gates will meet the gauge and opening requirements of the fence.