Site work, paving and outdoor lighting for a mixed-use development in Buffalo, New York. Completed plans call for site work for a transportation facility; for outdoor lighting for a transportation facility; and for paving for a transportation facility.

The project work provides for the rehabilitation and reconstruction of 3,165 linear feet of Taxiway A between the Runway 5 end and Taxiway D, removal and replacement of existing taxiway edge lighting with new LED fixtures, installation of in pavement taxiway centerline lights with new LED in pavement lights; and construction of pavement underdrains, and replacement of storm drainage systems, installed in conformance with current FAA recommended standards. Work shall proceed in strict accordance with these documents and the FAA Construction Safety and Phasing Plan completed for the project work. The Taxiway A pavement rehabilitation requires the removal of existing asphalt pavement overlay on concrete pavement, removal of existing concrete pavements, full depth asphalt pavement construction, variable depth asphalt pavement overlays, full depth PCC pavement construction, joint and crack repair, storm drainage work, installation of pavement underdrain systems, and installation of new taxiway pavement markings. Concurrent with the pavement rehabilitation and reconstruction, associated project electrical work will include, installation of new in pavement LED taxiway centerline lights on the remaining portion of taxiway A, installation of new LED taxiway edge lighting, and completion of Taxiway A centerline and edge lighting circuits necessary to conform with current standards. Technical questions should be directed to DiDonato Associates Engineering & Architecture, P.C., Mr. Christopher H. Gardner, P.E., telephone (716) 656-1900 or fax (716) 656-1987 or email (cgardner@didonato.cc). Administrative questions should be directed to NFTA, Mr. Sean Slagle, (716) 855-7461 or fax (716) 855-7447 or email (Sean.Slagle@nfta.com). The Contractor shall perform not less than 25% of the work with its own forces Question Deadline 11/08/2024 Technical questions should be directed to DiDonato Associates Engineering & Architecture, P.C., Mr. Christopher H. Gardner, P.E., telephone (716) 656-1900 or fax (716) 656-1987 or email (cgardner@didonato.cc). Administrative questions should be directed to NFTA, Mr. Sean Slagle, (716) 855-7461 or fax (716) 855-7447 or email (Sean.Slagle@nfta.com). To be given consideration a request for an explanation must be received at least five days prior to the date fixed for the opening of bids. If the NFTA is not provided a written request for explanations or clarifications of an item within the Contract Documents at least five (5) days prior to the date fixed for the opening of bids, the Contractor will be deemed to have waived its right to assert an interpretation of the documents contrary to that of the NFTA. The decision of the NFTA shall be final and conclusive.