Renovation of an educational facility in Bath, Pennsylvania. Completed plans call for the renovation of a educational facility.

George Wolf Elementary School HVAC Replacement Project in the form of MULTIPLE lump sum contracts. Contract 1: General Construction Contract 2: Mechanical Construction Contract 3: Electrical Construction The Work of Project is defined by the Contract Documents and includes, but is not limited to, the following: 1. Selective demolition 2. Selective renovations The Work under the Electrical Construction Contract includes all construction and other activities traditionally recognized as electrical work required by any of the Contract Documents including, but not limited to, the electrical drawings, specification Divisions 00, 01, 26, 28, except when specifically assigned to another contract for construction. Work in the Electrical Contract includes, but is not limited to, the following: 1. Demolition of existing electrical systems as noted and required for renovation work. 2. Electrical distribution. 3. Electrical grounding. 4. Lighting and power branch wiring. 5. Communication and systems. 6. Special electrical systems, 7. Electrical connections to equipment furnished under other contracts. 8. Structural supports, hangers, sleeves and inserts. 9. Perform all starting, commissioning, testing, adjusting, balancing and training of all electrical systems and equipment in accordance with the manufacturers' recommendations and in conjunction with the Owner's Commissioning Verification and Testing Agent(s). 10. Luminaires, lighting controls and all accessories. 11. Fire detection and notification systems. 12. Conduits and raceway for special systems as required. 13. Emergency lighting systems. 14. Coordinate work with all contractors including, but not limited to plumbing, general and HVAC contractors. Coordinate and confirm locations and rough-in for all work with all contractors. Make location adjustments as required. 15. Cable tray for all work as specified. 16. Raceways for all work. 17. All rough-in including conduit, pull wire in conduit, and back boxes for all work. 18. Floor and wall boxes for all work. 19. Furnish and install all accessories, hangers, Velcro wraps, etc. 20. Provide electrical dimensions and drawings and assist HVAC Contractor in preparation of coordination drawings. 21. Firestopping of Electrical Contractor Work. 22. Provide equipment and all necessary wiring for interfacing of the following systems: a. HVAC equipment b. Temperature control c. Plumbing equipment d. Gymnasium equipment and operable partitions e. Kitchen equipment f. Motor-operated roller shades g. Theatrical lighting and control systems. 23. 24. The EC is responsible for maintaining power to all areas of the occupied project for all phases of the project. Also see Section 015000 "Temporary Facilities and Controls" for temporary power needs. 25. The EC is responsible for maintaining existing fire alarm system in all Phased areas of construction. 26. Coordinate utility transformer installation and all primary and secondary cable terminations with local utility Question Deadline 10/16/2024 Questions received less than five (5) days prior to the date for opening of Bids may not be answered All questions must be submitted in writing as follows. Phone calls are not permitted. All questions must be sent to: 5.3.1 All questions must be sent to: Chris Haller, (CHaller@chasolutions.com) CHA 5.3.2 All MEP questions must be copied to: Jeff Machik (jmachik@snyderhoffman.com) Snyder Hoffman Associates, Inc.