Site work and paving for a road / highway in Baldwin, North Dakota. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Proposed Work Consists of 19.0300 Miles of Milling, Hma Overlay, Seal Coat, & Incidentals Located Cmc 0836, Jct 66th St Ne (Bismarck) E to Jct Us 83 And Involves Approximately: 1 L Sum Contract Bond; 8868 Gal Tack Coat; 87514 Sy Milling Pavement Surface; 422757 Sy Seal Coat; 19448 Ton Superpave Faa 45; 1 L Sum Hma Intelligent Compaction; 202 Ea Cored Sample; 148 Ton Patching; 1166 Ton Pg 58h-34 Asphalt Cement; 1 L Sum Mobilization; 560 Mhr Flagging; 5588 Unit Traffic Control Signs; 4 Ea Portable Rumble Strips; 50 Ea Delineator Drums; 150 Ea Tubular Markers; 100 Ea Stackable Vertical Panels; 280 Hr Pilot Car; 182 Sf Pvmt Mk Painted-message; 19830 Lf Short Term 4in Line-type Nr; 1773 Lf Short Term 8in Line-type Nr; 260500 Lf Pvmt Mk Painted 4in Line; 1773 Lf Pvmt Mk Painted 8in Line. Bid Range - $3,500,001 to $4,000,000 Dbe Goal = 4.5% Prequalification is required for all bidders submitting a bidding proposal form. Prequalification is required annually. Prequalified contractors who wish to renew their prequalification must submit a complete "Contractor's Prequalification Statement" by July 1 of each calendar year. Bidders who are not currently prequalified must submit a complete "Contractor's Prequalification Statement" at least 10 business days prior to the date of the bid opening. Information is available from the Construction Services Division of the North Dakota Department of Transportation. A bid guarantee is required by Section 24-02-20, NDCC. The bid guarantee may be a bid bond equal to 10 percent of the full amount of the bid or a cashier's check of the bidder on a solvent bank equal to 5 percent of the bid. Bid bond shall be on the department form SFN 14196. Prior arrangements may be made with the department to file bid guarantees in advance. The right is reserved to reject any and all proposals, to waive technicalities, or to accept such as may be determined to be for the best interests of the state. NDDOT - 24165 - Milling, HMA Overlay, Seal Coat, & Incidentals *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.