Site work and paving for a mixed-use development in Maryville, Missouri. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

Demolition and removal of two (2) existing traffic signals, sidewalk and roadway pavements, eight (8) existing traffic signal pullboxes and other associated materials indicated on the plans. Associated improvements include reconstruction of sidewalks, installation of two (2) traffic control signals and electrical conduits, pullboxes and wiring, relocating decorative light poles and bases, re-striping of portions of the existing roadway pavement and other related items shown on the plans. A certified check, bank draft, or a bid bond executed by the bidder and an approved Surety Company in the amount of five percent (5%) of the bid shall be submitted with each proposal. The OWNER reserves the right to reject any and all bids and to waive all informalities in bids. No bid may be withdrawn for a period of thirty (30) days after the date of bid openings. Provide all labor, materials, equipment, and supervision required to construct the sub-surface drainage system including: 1. Trenching and disposal of trench excavation. 2. Provide and install drainage tubing. 3. Provide clean stone backfill. 4. Sand and earth backfill. Retain this Article if specifying state or local DOT standard paving mixes; delete if specifying paving mixes other than those of state or local DOT. Provide hot-mix asphalt paving according to materials, workmanship, and other applicable requirements of standard specifications of state or local DOT. 1. Standard Specification: Missouri Standard Specifications for Highway Construction. 2. Measurement and payment provisions and safety program submittals included in standard specifications do not apply to this Section. Drawings and general provisions of contract, including general and supplementary conditions apply to this section. This part of specifications includes removing, relocating, testing, and placing into satisfactory operation the proposed lighting and electrical systems shown on the drawings and specified herein. Contractor shall submit detailed drawings, specifications and photometric calculations for any materials or equipment proposed to be provided by alternate manufacturers for approval.