Site work and paving for a road / highway in Fayetteville, Georgia. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Fayette County, Georgia is seeking quotes for crack sealing services. Question Deadline 11/04/2024 at 3:00 PM ET If you have questions, contact Sherry White via email swhite@fayettecountyga.gov. Quotes are being solicited to supply Fayette County Public Works Department with crack sealing services (PMAR) on 13.35 center line miles of various streets in Fayette County. The work will require bidder to provide all labor, administrative forces, equipment, materials, and other incidental items to seal cracks at designated locations. The vendor shall warranty all completed work from installation date for 6 months. Normal workday for this project shall be 8:00 AM to 5:00 PM and the normal work shall be Monday thru Friday. The County will consider extending workdays or workweeks upon written request to the County by the Vendor on a case-by-case basis. No work will be allowed on national holidays All work shall be completed by April 30th, 2024. Cracks in the existing pavements that are one quarter inch or greater in width shall be cleaned and sealed according to GDOT joint sealing specifications (Section 407). Cracks should be cleaned of foreign material and prepared per specifications prior to placing the sealing material. All materials shall meet appropriate GDOT specifications for Crack Sealing Material Type Poly-Modified Asphalt Rubber (PMAR) and acquired through an approved GDOT material source from the QPL #92C list. The quantities provided are estimates only and may differ from the actual work required. The County reserves the right to increase and decrease quantities at any time. The Vendor shall, always, conduct his work to assure the least possible obstruction of traffic. The Vendor as specified in the State of Georgia Department of Transportation Standard Specifications, Section 104.05 and 107.09 should provide for the safety and convenience of the public and the residents along the roadways and the protection of persons and property, Beginning with mobilization and ending with acceptance of work, the Vendor shall be responsible for providing a clean and safe work environment at the project site. The Vendor shall comply with all OSHA regulations as they pertain to this project. Crack sealing quantities will be measured and paid by centerline mile for each road.