Renovation of a detention facility in Bath, Ontario. Completed plans call for the renovation of a detention facility.

The Correctional Service of Canada requires the services of a qualified contractor to supply and install two (2) new radiators for a CUMMINS QSK60-G6 generator. The Contractor must: o Drain the engine coolant from the current radiator assemblies and dispose of it as per all Federal and Provincial environmental safety codes and regulations. o Remove front end enclosure housing panels to permit radiator removal. o Remove the two leaking radiators, disposing of them offsite as per all Federal and Provincial environmental safety codes and regulations. o Supply and install two (2) new Cummins radiators, with full length header plates. o Replace all gaskets (fibre) and sealant. o Replace all thermostats. o Replace all radiator hoses. o Supply and fill radiators with new engine coolant as per all Federal and Provincial environmental safety codes and regulations. o Install two (2) radiator heaters with integral pumps (to reduce thermal expansion shock). o Re-assemble entire enclosure housing. o Supply, connect and fuel a temporary, two-point-two (2.2) kilowatt generator for the entire period that the Bath generator will be offline. o Ensure the temporary generator automatically starts and provides power to both Bath and Millhaven Institutions within ten (10) seconds in the event of power loss from the distribution grid. o Disconnect and remove the temporary generator from the site once replacement of the new radiators is complete. o Ensure the CUMMINS QSK60-G6 generator is reconnected and functioning as intended. The Contractor must perform and complete the Work on or before March 31st, 2025. The estimated contract period will be 3 month(s), with a proposed start date of 2024/12/09. Documents can be obtained at: https://canadabuys.canada.ca/en/tender-opportunities