Site work for a municipal facility in Grand Prairie, Texas. Completed plans call for site work for a municipal facility.

Landfill Litter Fencing Deposit Add ($1,500.00). performance and payment bonds, each of said bonds to be in the amount of one hundred percent (100%) The city reserves the right to reject any or all bids and to waive formalities. performance and payment bonds, each of said bonds to be in the amount of one hundred percent (100%) The city also reserves the right to purchase these items through state-awarded contracts or other intergovernmental agreements when it is in the city's best interest. Question Deadline 11/14/2024 at 9:00 AM CT Online Q&A Yes Online Q&A Yes Information, questions, or clarification concerning the intent of this RFB should be in writing and addressed to Venona McGee at vmcgee@gptx.org, Deadline for Questions outlined in the Procurement Schedule. City of Grand Prairiesresponse to questions and requests for clarification will be posted to Planet Bids It is the intent of this specification to obtain a contract for the purchase of Landfill Litter Fences by the City of Grand Prairie Solid Waste & Recycling Department. 2. REQUIREMENTS 2.1. The minimum height of each litter fence will be 15' with a canopy, the minimum width will be 24' with a minimum depth of 8'. 2.2. The litter fence must be equipped with the net mesh being made of heavy gauge welded wire that is galvanized and coated with a 1.5" square opening. The back net must be reinforced with a minimum 3/16" aircraft cable and connected via the cable to the frame. 2.3. Each litter fence shall allow for the option of outrigger use during times of high winds. Outriggers shall be built into the frame for stability and extend to a minimum of 15' with a minimum of 3 depth settings. 2.4. Each unit must be portable and must be able to connect via a factory-installed adjustable lift adapter for any standard payloader bucket or a standard bulldozer blade. The unit must be capable of being lifted from the front or rear of the unit. Units requiring operators to exit the cab and make adjustments, move pins, or attach cables are not acceptable. 2.5. Lifting hooks must meet the following requirements. 2.5.1. Vertical height adjustment: Minimum of 6'9" to a max of 12'2". 2.5.2. Horizontal hook adjustments: Minimum of 5 increments from 11" to 2'7" 2.6. Units must be constructed with an additional 3/4 " thick steel plate along the front base of the unit. This is to prevent possible damage for U shaped landfill blades. 2.7. The uprights of each unit must be made of a 4" x 2" x 1/8" rectangular steel. 2.8. Each unit must be delivered already painted with a durable enamel paint. 2.9. Each unit must be manufactured with a heavy litter control panel and two side wing nets. Litter fences must be able to catch litter on all sides. 2.10. Each unit must be able to withstand a minimum of 70 MPH winds when loaded with windblown litter. 2.11. Each unit must have a minimum 5-year warranty.