Demolition and site work for a road / highway in Rosenberg, Texas. Completed plans call for the demolition of a road / highway; and for site work for a road / highway.

The deadline to ask questions is 2/04/2025 4:00 PM CST The Project Site. The project is located in Fort Bend County Municipal Utility District No. 222, Fort Bend County, Texas. The site is located along F.M. Highway 359, Fort Bend County Key Map No. 482- W&X. Scope of Work of the Contract includes the Construction of Demolition, Clearing and Grubbing in The Ridge at Tamarron. For construction contracts $50,000 and over, the bidder shall submit a certified or cashier's check on a responsible bank in the State equal to two percent (2%) of the maximum total bid amount. Make the cashier's check or bid bonds payable to the Owner. The Owner reserves the right to reject any or all bids and waive any or all irregularities. No bid may be withdrawn until the expiration of 90 days from the date bids are open. ATTENTION: Pursuant to Texas Government Code 2252.908, on behalf of Fort Bend County Municipal Utility District No. 222 (the "District") with a printed, executed and notarized original of a completed Certificate of Interested Parties form (Form 1295) with the bid. Failure to do so will result in the District's inability to execute the contract. To complete the disclosure of interested parties form, or for further information, please visit the Texas Ethics Commission's website a. Execute cutting (including excavating and backfilling), fitting or patching of the work required to: (1) Make several parts fit properly. (2) Uncover work to provide for installation of ill-timed work. (3) Remove and replace defective work. (4) Remove and replace work not conforming to requirements of the contract documents. (5) Remove samples of installed work as specified for testing. (6) Install specified work in existing construction. b. In addition to contract requirements, upon written instruction of the Engineer: (1) Uncover work to provide for observation of covered work. (2) Remove samples of installed materials for testing. (3) Remove work to provide for alteration of existing work. c. Do not endanger any work by cutting or altering the work or any part of it. d. Do not cut or alter the work of another Contractor without written consent by the Engineer. e. Prior to cutting which affects structural safety of the project, or the work of another Contractor, secure written approval by the Engineer. The work includes demolition of materials and equipment. Demolition work includes removal of the following items: a. General Work Items and Utilities. (1) Portion of Existing Force Main (2) Existing Lift Station Top b. Mechanical Work Items. (1) Existing Lift Station Piping (2) Existing Valves and Piping at Wastewater Treatment Plant c. Electrical Work Items. Existing Lift Station Controls Embankment work consists of placing and compacting approved materials to required lines, grades and cross sections. Waste material disposal consists of disposal of trees, stumps, logs, brush, roots, grass, vegetation, humus, rubbish and other objectionable matter from operations such as clearing and grubbing, excavation and grading. Unless otherwise specified, the Contractor is responsible for removal and disposal of waste material. Work covered under this section includes dewatering existing ponds as directed by the Engineer, removing muck from pond and backfilling with approved material to 95 percent (95%) standard proctor density. This specification also covers incidental work associated with filling the ponds. Incidental work includes clearing and disposing of all waste material within the limits of fill, transporting fill to fill areas and final clean-up and grading.