Site work, paving and renovation of a municipal facility in Arcata, California. Completed plans call for the renovation of a municipal facility; for site work for a municipal facility; and for paving for a municipal facility.

** As of MArch 6,2025, this project has not yet been awarded. A timeline for award has not yet been established.** A conditional or qualified bid will not be accepted if it modifies the Plans or Specifications or method of work. The work for this project consists of furnishing all labour, materials, and equipment supervision required for the installation of a new 750kW diesel generator and associated automatic transfer switch (ATS) and replacement of an existing open-transition ATS with a new closed-transition ATS and other related work. The existing 100kW generator, new 750kW generator, and ATSs shall be controlled by the site's existing supervisory control and data acquisition (SCADA) system. The work will generally consist of the following o New 750kW diesel generator, subbase fuel tank, stairs, platforms, and other appurtenances. o New 1200A ATS. o Replacement of existing 225A ATS. o Modifications to existing electrical system to accommodate new equipment. o Gradings and paving of area surrounding new 750kW generator and Tesla batteries. o New security fencing. o New conduit, conductors, and other ancillary electrical equipment as shown on Drawings. o Modifications to SCADA to achieve generator control as described in the technical specifications. o Other miscellaneous work as outlined in the Contract Documents. Each contractor or subcontractor shall submit a Qualifications Statement as a part of their bid, which shall include the following o Copy of California Contractor's license o Department of Industrial Relations registration number o List of a minimum of three completed projects over the last ten years of similar size and complexity to the coating portion of this work. Include the following for each project: a. Project name and location. b. Name of owner with contact number. c. Name of prime contractor with contact number. d. Name of engineer with contact number. e. Approximate size of generator(s) installed. f. Date of completion. Each proposal must be submitted on the prescribed form and accompanied by a certified check or Bid Bond in an amount of not less than 10 percent of the amount bid. Successful bidders will be required to furnish both a Payment Bond and Performance Bond in the full amount of the Contract Price. In accordance with Public Contract Code Section 10263, the Contractor will be allowed to substitute securities for monies normally withheld by the owner to insure performance under this contract. This is a Public Works Project funded with Federal (FEMA) and HBMWD funds. Therefore, both Federal prevailing wage rates and California State prevailing wage rates will be required on this project, whichever wages are higher. This project is subject to compliance monitoring and enforcement by the Department of Industrial Relations, State of California. The general prevailing wage rates applicable to the work are set by the Director of the Department of Industrial Relations. The Contractor shall comply with and shall ensure all subcontractors comply with all laws and regulations governing the contractor's and subcontractors performance on this project including, but not limited to anti-discrimination laws, workers compensation laws, and prevailing wage laws as set forth in California Labor Code, Sections 1720-1861 et seq. and licensing laws, as well as Federal Labor Standards set forth in the Davis-Bacon Act (40 USC 276(a-a5), the Copeland Anti-Kickback Act (40 USC 276(c) and the Contract Work Hours and Safety Standards Act (CWHSSA) (40 USC 327-333). The contractor is required to include the prevailing wage language in all subcontracts pursuant to California Labor Code 1775(E)(b)(1). The Contractor shall post, at appropriate conspicuous points on the site of the Project, a schedule showing all the determined general prevailing wage rates. Pursuant to Senate Bill 854, all contractors bidding on public works projects must register with the Department of Industrial Relations. Contractors are subject to a registration and annual renewal fee. No contractor or subcontractor may be listed on a bid proposal for a public works project submitted on or after March 1, 2015 unless registered with the Department of Industrial Relations pursuant to Labor Code section 1725.5 with limited exceptions from this requirement for bid purposes only under Labor Code section 1771. Accordingly, all Prime and Subcontractors contained in a bid must provide valid Department of Industrial Relations registration numbers. Failure to provide valid DIR registration numbers in the bid documents shall disqualify the bid.