Site work and paving for a road / highway in Lowville, New York. Completed plans call for site work for a road / highway; and for paving for a road / highway.

For Pavement Markings All questions regarding this bid should be submitted in writing(mail, fax, or email) to the County Purchasing Department. The initial contract term shall be for the period: April 1, 2025- August 31, 2025 The County reserves the right to reject any and all bids received. The County of Lewis ("County") seeks a qualified Vendor to provide all labor, equipment, materials, and supervision required to perform all operations necessary in connection with striping of parking lots, interior approach roads, and special markings along County Highways at various locations as well as a bid alternate item for road striping as needed for the County and/or any municipalities that piggyback off this contract. SPECIFICATIONS JOB DESCRIPTION a) Under this work, the awarded bidder ("Vendor") shall furnish and apply painted pavement markings at the locations and in accordance with the patterns indicated on plans or as directed by the County's Highway Superintendent, and in accordance with the federal Manual on Uniform Traffic Control Devices ("MUTCD") and these specifications. b) Different types of paint applications will be required depending on the location and project specific requirements. All items are required to be bid. The bid items are broken into paint application types: c) Waterborne Paint without the application of glass beads (NYSDOT Item 640) d) Waterborne Paint with the application of glass beads (NYSDOT Item 640) e) Thermoplastic Reflectorized Pavement Markings (NYSDOT Item 687) GENERAL f) All markings and patterns shall be placed in compliance with the provisions of the Manual of Uniform Traffic Control Devices. Prior to pavement marking work, a detailed schedule of operations is to be submitted to the Superintendent of Highways or his project representative for approval. All passing and no passing zones are to be engineered by a licensed Professional Engineer. g) When pavement markings are to be applied under traffic, the Contractor shall provide all necessary markers, flags, signs and directions to traffic to protect both the painted markings and the traveling public. The Contractor will be responsible for removing all tracking marks, spilled paint, or paint applied in unauthorized areas, subject to the approval of the Superintendent. h) The exact location where center or lane lines are to be applied to the pavement shall be made visible for the Contractor for the purpose of guiding his equipment. It shall be in the form of existing center line, lane lines or painted spots. Contractor shall include with his bid a price per mile for spotting centerline on new pavement surfaces. Provisions for any other means of guiding his equipment shall be the responsibility of the Contractor. Newly applied markings on previously striped sections shall coincide with the existing traffic markings. The Contractor shall be responsible for cleaning the pavement of dust, dirt, old pavement markings, or other loose foreign materials, which may be detrimental to the adhesion of the paint. The Contractor shall furnish a power broom equipped with a power blower to be used wherever necessary for the pavement cleaning. Cleaning by air jets alone will not be allowed. The paint shall be applied only on thoroughly dry pavement surfaces and when the weather is otherwise favorable in the opinion of the Superintendent of Highways. The Contractor shall advise the Superintendent of Highways or his designated inspector at least twenty-four (24) hours before any application work shall be done or before resuming application after any delay or postponement.