This is a service / maintenance or supply contract in Effingham, Illinois. Contact the soliciting agency for additional information.

This project requires 24% DBE participation, or if the contract goal is not met, documented evidence of good faith efforts. The Complexity Factor for this project is 0.035. The Consultant who is selected for this project and all Subconsultants the Prime Consultant will be using are scheduled to attend an initial meeting on April 30, 2025, at 10:00 AM at the Region Four/District Seven Office in Effingham. Phase I/II engineering services are required for various projects on various routes throughout District Seven. Phase I work, if required, may consist of conducting route surveys, hydraulic surveys, hydraulic analysis, geometric studies, preparing bridge condition reports, performing location studies, and preparing project reports (categorical exclusion projects only). This work will include data collection, development of alignment alternatives, cost estimates, traffic management analysis, accident analysis, TS&L structure plans, and other related work and exhibits necessary to produce the Project Report, as necessary. Phase II work, if required, may consist of conducting route surveys, hydraulic reports, traffic signal plans, preparation of TS&L plans, roadway plans, structure plans, ADA plans, and any other related work to complete final plans, specifications, and estimates, as necessary. Questions concerning this Bulletin should be directed to: E-mail: DOT.ConsultantServices@illinois.gov Or mailing address: Bureau of Design and Environment 2300 South Dirksen Parkway Attn: Consultant Unit Room 330 Springfield, IL 62764 Work orders under the blanket agreement will be negotiated and authorized by the department on an as-needed basis. The estimated engineering fee for this project is $2,000,000. The completion date for this contract will be 60 months after authorization to proceed. The Prime firm must be prequalified in the Highways (Roads and Streets) category to be considered for this project. Statements of Interest, including resumes of only the key people noted above, must be submitted electronically to the Central Bureau of Design and Environment through the Engineering Prequalification and Agreement System (EPAS). The method of contractor selection has not been determined at this time. ILDOT - 43 - RFP - Various Phase I/II Projects, Various Routes