Renovation of an educational facility in St Catharines, Ontario. Completed plans call for the renovation of a educational facility.

1. The Work described herein includes for all labour and material, including overtime, required to meet the agreed project schedule, to modernize one (1) hydraulic elevator located at Brock University Chown Complex Block H, St. Catharines, Ontario, Provincial Number 36190. Provide all work required for a completed project, accepted by the Authority Having Jurisdiction, including: 2. A completed system with an engineered design lifespan of 25 years. 3. New non-proprietary, microprocessor-based, solid-state electrical controller, 4. New pumping unit. 5. New valve. 6. New motor. 7 New oil storage tank. 8. Retain cylinder and piston. 9. Refurbish landing door locks, pick up assemblies. New relating system, door closers and related hardware. 10. Completely refurbish the cab interior finishes. 11. New vandal-resistant stainless steel illuminated car and hall push buttons to comply with accessibility requirements. 12. New signals, including car direction and position indicators and lobby position indicators. 13. New heavy-duty car door operator, clutch assembly, and related hardware. 14. Provision of manual emergency recall and in-car emergency service. 15. A battery-powered safety system to move the car in the event of power failure. 16. Full parts, labour, and all associated code-required preventive maintenance, including all system shutdown callbacks on all elevator components for a subsequent twelve (12) month period after the final inspection certificate has been signed by the Consultant. 17. Provide required demolition and removal and disposal of existing elevator system and all redundant elevator equipment, including machine room, hoistway, and hall fixtures. Salvage and retain for use by the owner of elevator components that will be useful for servicing the balance of the elevators on site, particularly circuit boards. 18. Provide required engineering and coordination of various elements and suppliers to provide a complete Code-compliant project. 19. Provide equipment guarding in accordance with MOL 0. Reg 851 and TSSA document: Elevator Machine Room Equipment Guarding Best Practices. 20. Above is a brief description only. The following specifications detail the complete Work. Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform. Question Acceptance Deadline 2025/03/04 04:00:00 PM EST