Site work and paving for a mixed-use development in Roseville, California. Design plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

Widen Roseville Parkway between Gibson Drive and Creekside Ridge Drive intersections. Roadway improvements at the Pleasant Grove Boulevard intersection are also included. This project is to be constructed in two phases: Phase 1: • Adding a third left-turn lane on southbound Pleasant Grove Boulevard onto eastbound Roseville Parkway. • Extending the right turn lane on northbound Pleasant Grove Blvd to eastbound Roseville Parkway. • Adding a bus turnout on Roseville Parkway between West Drive and Reserve Drive. • Constructing intersection improvements at Roseville Parkway and Galleria Boulevard. Phase 2: • Constructing remaining infrastructure to widen Roseville Parkway from 3 lanes to 4 lanes in each direction from Creekside Ridge Drive to the eastern end of Gibson Drive - The westbound direction will be widened between Creekside Ridge Drive and Gibson Drive (east). - The eastbound direction will be widened between Reserve Drive and Creekside Ridge Drive. Project will also include: Intersection improvements including modifications to existing traffic signals. • Construction of new lanes, sidewalks, curbs and gutters where necessary. • Updated signage and pavement striping along the project route. • Necessary utility adjustments. As of February 24, 2025, this project is in design. Information regarding a design team is not available. Phase 1 construction is anticipated from approximately summer 2025 to spring 2025. Phase 2 will begin when adequate funding is identified, which may be in 2028-2029. *Project information, including timeline and contacts, has been obtained through public sources. The content management team continues to pursue additional details; however, the contact(s) listed have yet to disclose or confirm any information. Inquiries should be directed to the contact(s) listed.