Renovation of a residential development in Lake in the Hills, Illinois. Completed plans call for the renovation of a residential development.

Well 14 Siding Replacement Project & Well 6 Roof and Gutter Replacement Project Question Deadline 03/17/2025 at 12:00 PM CT All Official notifications or questions about this RFP shall be made in writing via email to Deputy Director of Public Works, Tim Bassuener, at tbassuener@lith.org The Village is seeking to hire a contractor to provide all labor, equipment, and materials to completely replace the siding a t Well 14, located at 842 McPhee Drive, Lake in the Hills 60156, and the roof and gutter at Well 6, located at 310 Council Trail, Lake in the Hills 60156. Well 6 Roof and Gutter Project o Roof Shingles Owens Corning TruDefinition Duration shingles "color to be picked by the Villages representative." Glass fiber mat base Architectural type. Shall meet UL 790 Class A Fire Resistance Shall meet ASTM D3018, Type I (Self-Sealing) Shall meet ASTM D3161 Class F Wind Resistance Shall be fungus-resistant Install shingles in accordance with the manufacturer's printed installation instructions. Install first and successive courses of shingles stepping diagonally up and across the roof deck with the manufacturer's recommended offset at each succeeding course. Hip and Ridge Shingles Provide hip and ridge shingles color formulated to match the new roof shingles. Hip and ridge shingles shall be compatible with the roof shingles and shall be installed according to the manufacturer's instructions. Hip and ridge shingles shall meet and be installed to conform to the same standards as the roof shingles. Starter Shingles A starter strip shall be installed along all eaves. Install the starter course at the lowest roof edge and along the rake, with the edge of the shingles extending 1/4 inch over the roof's edge. The starter strip shall be compatible with the roof shingles and shall be installed according to the manufacturer's instructions.