Renovation of a multi-residential development in Somerville, Massachusetts. Completed plans call for the renovation of a multi-residential development.

General Bidders are to be DCAMM certified in Windows. The project scope consists of window replacement at the Weston Manor Apartments in Somerville, MA. The general scope of the construction work is as follows: Complete removal and replacement of the existing windows. Scrape & repaint existing juliet balconies, as indicated on the project drawings. Windows will be replaced with new, energy efficient, fiberglass framed systems with low-e, insulated glass panels. Windows shall be double-hung configuration. All windows shall be equipped with window opening control devices complying with ASTM F 2090. The Contractor's Abatement Contractor shall be responsible for the complete removal and legal disposal of the existing window systems, including, sash, frame, blocking, trim and related hardware and all work required to carefully remove the noted components, as indicated on the drawings. Note: Contractor shall only remove the current aluminum framed windows, including frame and sash. The frame of the aluminum windows that were original to the building, shall remain. Contractor shall coordinate all demolition work with the Abatement Contractor to provide a secure and weathertight building, until the new window systems have been installed. Question Deadline 03/11/2025 at 2:00 PM ET All questions and requests for interpretations must be submitted in writing via e-mail to bryan.byrnesjacobsen@socotec.us The project scope includes but is not limited to replacement of the existing windows on the west elevation of the Weston Manor Apartments at Weston Avenue Somerville, MA 02144. Additionally, the work includes abatement of the window caulking and preparation and painting of the existing railings. Window Replacement Project at Weston Manor Apartments - Replacement of the existing windows on the west elevation of the Weston Manor Apartments. Abatement of the window caulking and preparation and painting of the existing railings. Contractor Qualification DCAMM Certificate Required for DCAMM contracts over $150,000, Highway Division contracts over $50,000. The General Bidder must be DCAMM certified in the category of General Building Construction to be considered an eligible bidder.