Renovation of an educational facility in Corpus Christi, Texas. Completed plans call for the renovation of a educational facility.

**As of April 25, 2025, the project was awarded to Mission Restaurant Supply, with an awarded amount of $2,929,528.23.** Cafeteria Serving Line Equipment Replacement Project For additional information call (361) 695-7350 and refer to the corresponding proposal number. For more information regarding this RFP visit the CCISD Website online. Equipment Contractor must deliver, assemble, set in place including leveling, fastening, etc. and make all final connections to ensure the equipment is fully installed and operational. The equipment contractor shall further provide one year's service including all parts and labor, and instruct Food Service employees on the operation and care of the equipment. Final plumbing and electrical connections will be done by vendor, or a contractor appointed by the vendor. 1. BARNES ELEMENTARY SCHOOL General Serving Line Equipment Specifications: Countertop: o 3 cm manufactured stone counter tops at height of 34" A.F.F. o Cambria Summerhill High Gloss o Field joints and seams by MUS Trayslides: o 3 cm manufactured stone trayslides at height of 29" A.F.F. o 12" fixed o Cambria Summerhill High Gloss o LED lights provided under trayslides to cascade light on serving line fronts. Front Panels: o Plastic Laminate front panels. Wilsonart French Pear 8220 Framing: o Continuous construction featuring semi-open base fabrication. o All serving line framing to be 1-1/4" thick wall, 304 series stainless steel, fully welded square tube framing. o Galvanized frames, angle iron framing or bolted stainless steel framing will NOT be accepted. o Rear legs, cross supports, and undershelf supports manufactured of 304 series, 1 5/8" stainless steel. o Legs provide with adjustable bullet feet. o Serving line fronts & sides provided with flat stainless steel kickplate. Body Panels: o 18-gauge, type 304 series stainless steel. Breath Guards: o Elite breath guard posts to penetrate through countertop and mounted in 4" milled stainless steel housing, fully welded to counter framing, under counter surface. o Surface mount guards not accepted. o Top and front to be 3/8" thick tempered glass. o End panels to be 1/4 " thick tempered glass. o Top glass to be non-adjustable and set in fixed brackets. o Front glass to have adjustable pitch. o Posts to be 1" OD round, fully polished stainless steel. o All display lights to be mounted to fully welded 1" thick double hat channel. o All heat lamps where required per drawings. o Display lights to be UL listed LED fixtures. o All breath-shields to comply with NSF 2011 regulations. 2. CLUB ESTATES ELEMENTARY SCHOOL General Serving Line Equipment Specifications: Countertop: o 3 cm manufactured stone counter tops at height of 34" A.F.F. o Cambria Summerhill High Gloss o Field joints and seams by MUS Trayslides: o 3 cm manufactured stone trayslides at height of 29" A.F.F. o 12" fixed o Cambria Summerhill High Gloss o LED lights provided under trayslides to cascade light on serving line fronts. Front Panels: o Plastic Laminate front panels. Wilsonart French Pear 8220 Framing: o Continuous construction featuring semi-open base fabrication. o All serving line framing to be 1-1/4" thick wall, 304 series stainless steel, fully welded square tube framing. o Galvanized frames, angle iron framing or bolted stainless steel framing will NOT be accepted. o Rear legs, cross supports, and undershelf supports manufactured of 304 series, 1 5/8" stainless steel. o Legs provide with adjustable bullet feet. o Serving line fronts & sides provided with flat stainless steel kickplate. Body Panels: o 18-gauge, type 304 series stainless steel. Breath Guards: o Elite breath guard posts to penetrate through countertop and mounted in 4" milled stainless steel housing, fully welded to counter framing, under counter surface. o Surface mount guards not accepted. o Top and front to be 3/8" thick tempered glass. o End panels to be 1/4 " thick tempered glass. o Top glass to be non-adjustable and set in fixed brackets. o Front glass to have adjustable pitch. o Posts to be 1" OD round, fully polished stainless steel. o All display lights to be mounted to fully welded 1" thick double hat channel. o All heat lamps where required per drawings. o Display lights to be UL listed LED fixtures. o All breath-shields to comply with NSF 2011 regulations. Base Construction: o Open-base, continuous construction. o 18-gauge, type 304 series stainless steel. DAWSON ELEMENTARY SCHOOL General Serving Line Equipment Specifications: Countertop: o 3 cm manufactured stone counter tops at height of 34" A.F.F. o Cambria Summerhill High Gloss o Field joints and seams by MUS Trayslides: o 3 cm manufactured stone trayslides at height of 29" A.F.F. o 12" fixed o Cambria Summerhill High Gloss o LED lights provided under trayslides to cascade light on serving line fronts. Front Panels: o Plastic Laminate front panels. Wilsonart French Pear 8220 Framing: o Continuous construction featuring semi-open base fabrication. o All serving line framing to be 1-1/4" thick wall, 304 series stainless steel, fully welded square tube framing. o Galvanized frames, angle iron framing or bolted stainless steel framing will NOT be accepted. o Rear legs, cross supports, and undershelf supports manufactured of 304 series, 1 5/8" stainless steel. o Legs provide with adjustable bullet feet. o Serving line fronts & sides provided with flat stainless steel kickplate. Body Panels: o 18-gauge, type 304 series stainless steel. Breath Guards: o Elite breath guard posts to penetrate through countertop and mounted in 4" milled stainless steel housing, fully welded to counter framing, under counter surface. o Surface mount guards not accepted. o Top and front to be 3/8" thick tempered glass. o End panels to be 1/4 " thick tempered glass. o Top glass to be non-adjustable and set in fixed brackets. o Front glass to have adjustable pitch. o Posts to be 1" OD round, fully polished stainless steel. o All display lights to be mounted to fully welded 1" thick double hat channel. o All heat lamps where required per drawings. o Display lights to be UL listed LED fixtures. o All breath-shields to comply with NSF 2011 regulations. Base Construction: o Open-base, continuous construction. o 18-gauge, type 304 series stainless steel. o Under counter storage where space allows with 18" high ends and 6" high back. Undershelf is held back 6" from front panel forming a utility chase for plumbing and electrical services. o No doors Dawson Elementary School 6821 Sanders Dr Corpus Christi TX 78413 1. Mod-U-Serve is responsible for the fabricating of the product, including manufacturer provided or sourced components, with proper workmanship, void of errors, per the written specification and signed submittal drawings, per the scope of work timeframe defined. 2. Mod-U-Serve will thoughtfully remove existing serving lines and appropriately dispose of them. 3. Mod-U-Serve is to make all electrical and plumbing upgrades as necessary. 4. Mod-U-Serve will cut and cap any unnecessary utilities 5. Mod-U-Serve is to deliver, provide assembly, leveling and start-up of all equipment; make all final electrical connections as specified; perform all necessary site visits prior to and during fabrication and for any field measurements; install and make all serving lines, buyout equipment and UL Listed Utility Risers ready for final electrical connections and perform all equipment start up 6. All existing signage will be removed by Mod-U-Serve and replaced with servery marketing art and decor to include suspended and mounted art: menu boards, mascot cafe sign, dining room identification art, custom designed wall and suspended ceiling art. 7. Mod-U-Serve is responsible for removing all installation related trash and debris from the jobsite. 8. Upon final completion of the installation of the serving line, it is the responsibility of the Mod-U-Serve sales representative to provide and/or arrange for a thorough educational demonstration covering operation, cleaning, and preventative maintenance for all equipment installed on this project. 9. EXCLUSIONS: Any asbestos and/or mold abatement, removal, or remediation. RAFAEL GALVAN ELEMENTARY SCHOOL General Serving Line Equipment Specifications: Countertop: o 3 cm manufactured stone counter tops at height of 34" A.F.F. o Cambria Summerhill High Gloss o Field joints and seams by MUS Trayslides: o 3 cm manufactured stone trayslides at height of 29" A.F.F. o 12" fixed o Cambria Summerhill High Gloss o LED lights provided under trayslides to cascade light on serving line fronts. Front Panels: o Plastic Laminate front panels. Wilsonart French Pear 8220 Framing: o Continuous construction featuring semi-open base fabrication. o All serving line framing to be 1-1/4" thick wall, 304 series stainless steel, fully welded square tube framing. o Galvanized frames, angle iron framing or bolted stainless steel framing will NOT be accepted. o Rear legs, cross supports, and undershelf supports manufactured of 304 series, 1 5/8" stainless steel. o Legs provide with adjustable bullet feet. o Serving line fronts & sides provided with flat stainless steel kickplate. Body Panels: o 18-gauge, type 304 series stainless steel. Breath Guards: o Elite breath guard posts to penetrate through countertop and mounted in 4" milled stainless steel housing, fully welded to counter framing, under counter surface. o Surface mount guards not accepted. o Top and front to be 3/8" thick tempered glass. o End panels to be 1/4 " thick tempered glass. o Top glass to be non-adjustable and set in fixed brackets. o Front glass to have adjustable pitch. o Posts to be 1" OD round, fully polished stainless steel. o All display lights to be mounted to fully welded 1" thick double hat channel. o All heat lamps where required per drawings. o Display lights to be UL listed LED fixtures. o All breath-shields to comply with NSF 2011 regulations. Base Construction: o Open-base, continuous construction. o 18-gauge, type 304 series stainless steel. o Under counter storage where space allows with 18" high ends and 6" high back. Undershelf is held back 6" from front panel forming a utility chase for plumbing and electrical services. o No doors Page 22 of 85 Legs: o Counter legs to be 6" adjustable legs. o Counter legs to be hidden behind removable, flush, stainless-steel kickplate. Electrical: o All components are to be connected to a UL Listed Load Center Box with proper NEMA Plug Configurations. o All serving lines are to be fed electrical via stainless steel utility risers extending from the floor to 6" above the ceiling. Utility risers are to be UL listed and provided with removable access panels. o All serving lines to be pre-wired, needing only final connection to the load center terminal block. o POS units provided by Corpus Christi ISD. Warranty: o Twelve (12) month limited warranty on parts and labor. o Five (5) year compressor parts warranty. Alternates or substitutes: o Alternates or substitutes must be approved by district and accompanied by specification sheets and submittal ready drawings. MIRELES ELEMENTARY SCHOOL General Serving Line Equipment Specifications: Countertop: o 3 cm manufactured stone counter tops at height of 34" A.F.F. o Cambria Summerhill High Gloss o Field joints and seams by MUS Trayslides: o 3 cm manufactured stone trayslides at height of 29" A.F.F. o 12" fixed o Cambria Summerhill High Gloss o LED lights provided under trayslides to cascade light on serving line fronts. Front Panels: o Plastic Laminate front panels. Wilsonart French Pear 8220 Cashier Stands: o Stainless steel counter tops with stainless steel trayslides o Plastic laminate counter fronts and sides. Wilsonart French Pear 8220 Framing: o Continuous construction featuring semi-open base fabrication. o All serving line framing to be 1-1/4" thick wall, 304 series stainless steel, fully welded square tube framing. o Galvanized frames, angle iron framing or bolted stainless steel framing will NOT be accepted. o Rear legs, cross supports, and undershelf supports manufactured of 304 series, 1 5/8" stainless steel. o Legs provide with adjustable bullet feet. o Serving line fronts & sides provided with flat stainless steel kickplate. Body Panels: o 18-gauge, type 304 series stainless steel. Breath Guards: o Elite breath guard posts to penetrate through countertop and mounted in 4" milled stainless steel housing, fully welded to counter framing, under counter surface. o Surface mount guards not accepted. o Top and front to be 3/8" thick tempered glass. o End panels to be 1/4 " thick tempered glass. o Top glass to be non-adjustable and set in fixed brackets. o Front glass to have adjustable pitch. o Posts to be 1" OD round, fully polished stainless steel. o All display lights to be mounted to fully welded 1" thick double hat channel. o All heat lamps where required per drawings. o Display lights to be UL listed LED fixtures. o All breath-shields to comply with NSF 2011 regulations. Base Construction: o Open-base, continuous construction. o 18-gauge, type 304 series stainless steel. o Under counter storage where space allows with 18" high ends and 6" high back. Undershelf is held back 6" from front panel forming a utility chase for plumbing and electrical services. o No doors Legs: o Counter legs to be 6" adjustable legs. o Counter legs to be hidden behind removable, flush, stainless-steel kickplate. Electrical: o All components are to be connected to a UL Listed Load Center Box with proper NEMA Plug Configurations. o All serving lines are to be fed electrical via stainless steel utility risers extending from the floor to 6" above the ceiling. Utility risers are to be UL listed and provided with removable access panels. o All serving lines to be pre-wired, needing only final connection to the load center terminal block. o POS units provided by Corpus Christi ISD. Warranty: o Twelve (12) month limited warranty on parts and labor. o Five (5) year compressor parts warranty. Alternates or substitutes: o Alternates or substitutes must be approved by district and accompanied by specification sheets and submittal ready drawings. OAK PARK ELEMENTARY SCHOOL General Serving Line Equipment Specifications: Countertop: o 3 cm manufactured stone counter tops at height of 34" A.F.F. o Cambria Summerhill High Gloss o Field joints and seams by MUS Trayslides: o 3 cm manufactured stone trayslides at height of 29" A.F.F. o 12" fixed o Cambria Summerhill High Gloss o LED lights provided under trayslides to cascade light on serving line fronts. Front Panels: o Plastic Laminate front panels. Wilsonart French Pear 8220 Framing: o Continuous construction featuring semi-open base fabrication. o All serving line framing to be 1-1/4" thick wall, 304 series stainless steel, fully welded square tube framing. o Galvanized frames, angle iron framing or bolted stainless steel framing will NOT be accepted. o Rear legs, cross supports, and undershelf supports manufactured of 304 series, 1 5/8" stainless steel. o Legs provide with adjustable bullet feet. o Serving line fronts & sides provided with flat stainless steel kickplate. Body Panels: o 18-gauge, type 304 series stainless steel. Breath Guards: o Elite breath guard posts to penetrate through countertop and mounted in 4" milled stainless steel housing, fully welded to counter framing, under counter surface. o Surface mount guards not accepted. o Top and front to be 3/8" thick tempered glass. o End panels to be 1/4 " thick tempered glass. o Top glass to be non-adjustable and set in fixed brackets. o Front glass to have adjustable pitch. o Posts to be 1" OD round, fully polished stainless steel. o All display lights to be mounted to fully welded 1" thick double hat channel. o All heat lamps where required per drawings. o Display lights to be UL listed LED fixtures. o All breath-shields to comply with NSF 2011 regulations. Base Construction: o Open-base, continuous construction. o 18-gauge, type 304 series stainless steel. o Under counter storage where space allows with 18" high ends and 6" high back. Undershelf is held back 6" from front panel forming a utility chase for plumbing and electrical services. o No doors Page 30 of 85 Legs: o Counter legs to be 6" adjustable legs. o Counter legs to be hidden behind removable, flush, stainless-steel kickplate. Electrical: o All components are to be connected to a UL Listed Load Center Box with proper NEMA Plug Configurations. o All serving lines are to be fed electrical via stainless steel utility risers extending from the floor to 6" above the ceiling. Utility risers are to be UL listed and provided with removable access panels. o All serving lines to be pre-wired, needing only final connection to the load center terminal block. o POS units provided by Corpus Christi ISD. Warranty: o Twelve (12) month limited warranty on parts and labor. o Five (5) year compressor parts warranty. Alternates or substitutes: o Alternates or substitutes must be approved by district and accompanied by specification sheets and submittal ready drawings.