Site work for a water / sewer project in Fort Worth, Texas. Completed plans call for site work for a water / sewer project.

The District is seeking bids for the installation of a single flat slab that will vary on the downstream side of three separate check dams. Scope of Work/Construction The District is seeking bids for the installation of a single flat slab that will vary on the downstream side of three separate check dams. The slab dimensions and reinforcement specifications are outlined below. Scope Details: Slab Dimensions and Thickness: Install a single flat slab with overall dimensions of 30 feet by 20 feet. The slab will be 8 inches to 12 inches in thickness, as determined by site conditions and project requirements. Reinforcement: Reinforcement will consist of #4 rebar, placed at 12-inch centers in both directions (longitudinal and transverse). Dowel into existing dams and into rock below with rebar to the slab is secured. Variation in Slab: The slab design will vary on the downstream side of the three separate check dams based on the site conditions. Specific adjustments will be made to accommodate any changes in elevation, drainage, or other site factors. Pre-Bid Meeting: Interested contractors are encouraged to attend the pre-bid meeting to gain a clearer understanding of the project scope and site conditions. Address 4545 Bellair Dr S, Fort Worth, TX 76109 Contractor Requirements: Contractors must provide their own equipment, labor, and materials necessary for the installation of the slab. The work must be completed in compliance with all local codes, safety standards, and environmental regulations. Question Submission Deadline: March 25, 2025, 5:00pm Bid Submission Deadline: