Renovation of a municipal facility in Kenora, Ontario. Completed plans call for the renovation of a municipal facility.

The work to be undertaken generally involves, but is not necessarily limited to, the supply and installation of two (2) energy recovery ventilators (ERV) to service the second and third floors of the City Hall building located at 1 Main Street South in Kenora, Ontario. .1 Mechanical 1 Supply and install Energy Recovery Ventilator in accordance with manufacturer's instructions and as specified in drawing package. This shall include applicable controller included with unit. 2 Supply and install spiral ductwork throughout, complete with diffusers/grilles/dampers/louvers where applicable. Provide insulation to intake and exhaust ducts as required and in accordance with good practice. 3 Supply and install fire dampers at each duct penetration through a fire wall. Locations indicated on drawings. 4 Supply and install in duct, electric preheat coil serving the energy recovery ventilator as indicated on drawings. .2 Electrical 1 Supply and install electrical receptacle as indicated on drawings to be used as power supply for ERV. 2 Install ERV wall control as indicated on drawings. 3 Supply and install duct smoke detector, connect to building fire alarm system and interlock with ERV. 4 Provide power to electric preheat coil installed by mechanical contractor. .3 Commissioning 1 Commission all installed equipment as per manufacturer's instructions. 2 Ensure all equipment operates as expected. 3 Provide TAB. 4 Submit all closeout documents as outlined in Section 01 78 00 5 Provide demonstration and training as required and in accordance with Section 01 79 00 .4 Safety 1 Ensure all work is completed by certified personal. Work shall comply with enclosed space and working at heights regulations where applicable. Question Acceptance Deadline: 2025/03/28 04:00:00 PM CDT Official bid documents must be obtained from www.merx.com .