Renovation of a swimming pool in Coquitlam, British Columbia. Completed plans call for the renovation of a swimming pool.

The City requires qualified, experienced companies to provide labour, equipment, materials, fuel, transportation, overhead and all that is required for Eagle Ridge Pool Repair – Phase 1 (the ‘‘Work”). Contractor should have at least five (5) years of specialized experience in pool tank and deck restoration. The Contractor must have successfully completed two (2) recreational pool projects of similar size, scope, and complexity within the past five (5) years. For further details, refer to: Appendix A - Eagle Ridge Pool – Outdoor Pool Restoration Drawings dated July 29, 2025 Appendix B – Eagle Ridge Pool – Outdoor Pool Restoration Specifications dated July 28, 2025 Work includes but not necessarily limited to: a) Pool Tank Wall Restoration Removal of the existing pool coating from the walls to the underlying concrete substrate. Surface preparation of the substrate as required by shot blasting, wet grit blasting or an approved alternate method to achieve ICRI CSP conditions as specified herein (lump sum price item). Repair all concrete cracks by routing and sealing at the walls as directed by the Consultant and specified herein (unit price item). Structural repair of concrete deterioration due to corrosion of reinforcing steel (delamination repairs) where directed by the Consultant (unit price item). Apply specified cementitious parge coat/ resurfacing material over the concrete substrate where directed by the Consultant (lump sum price item). Surface preparation and installation of specified liquid applied pool liner/coating membrane (lump sum price item). Remove all existing wall expansion joint sealants. Perform surface preparation and apply specified sealants complete with joint backup along the existing joints (lump sum price item). Repaint pool tank wall surfaces impacted by the work to match the existing/ pre-construction condition (lump sum price item). b) Skimmer Gutter Restoration – North, South and West edges of the pool basin only as indicated on the drawings Structural repair of concrete deterioration due to corrosion of reinforcing steel (delamination repairs) where directed by the Consultant (unit price item). Apply specified cementitious parge coat/ resurfacing material over the concrete substrate where directed by the Consultant (lump sum price item). Surface preparation and installation of specified liquid applied pool liner/coating membrane complete with specified transitions to the pool basin wall coatings (lump sum price item). Remove all existing expansion joint sealants. Perform joint surface preparation and apply specified sealants complete with joint backup along the existing joints (lump sum price item). c) Pool Perimeter Expansion Joints Remove all existing joint sealant along the full length of the perimeter joint as indicated in the drawings (lump sum price item). Perform surface preparation, priming and cleaning of the joint as specified herein (lump sum price item). Using a ½’’ form against the back of the perimeter pool wall, rebuild the basin-side joint nosing; removing the form will leave a ½’’ wide expansion joint (lump sum price item). Perform pressure injection with grout or sealant materials at locations of active water seepage as directed by the Consultant, prior to backer installation (unit price item). Apply specified sealant complete with joint backup along the existing expansion joints (lump sum price item). d) Weatherproof Enclosure (Optional Price Item) Contractor to provide weather protection including temperature and moisture control to complete the work within the scheduled timeline. The date of completion is not flexible as the pool must be prepared for the 2026 season. Weather Protection may include of a combination of rolling scaffolding with a shrink-wrap canopy, electric heaters, or approved alternate methods.