Site work and paving for a road / highway in Eau Claire, Wisconsin. Working plans call for site work for a road / highway; and for paving for a road / highway.

As of May 16, 2025. No award was given. No plans for a rebid yet. The Bidder shall submit the bid with the following guidelines: -An ISSA approved, Type II mixture containing a mixture of polymer-modified emulsified asphalt, mineral aggregate, water, and specified additives, proportioned, mixed, and uniformly applied at a rate of 16 to 20 LBS/SY spread over a properly prepared asphalt surface. The mix shall be capable of being spread in variable thickness cross-sections (wedges, ruts, scratch courses, and surfaces) which, after curing and initial traffic consolidation, resists compaction throughout the entire design tolerance range of asphalt binder content and variable thickness to be encountered. -The end product shall maintain a skid-resistant surface throughout the service life of the micro surfacing. The mix shall be a quick-traffic system that will be able to accept straight rolling traffic one hour after application. -Contractor shall inspect requested roads and provide Town with suggested amounts of lifts or wedging to provide a smooth driving surface. -Micro surfacing shall be provided when roadway and air temperature exceed 55F and mixed and applied using an ISSA approved continuous run or continuous flow machine fitted with a functioning electronic mix control system. -Prior to micro surfacing, the surface shall be cleared of all loose material, oil spots, vegetation, and other objectionable material. The Town Board of the Town of Seymour reserves the right to reject any or all bids or parts thereof, and to waive any technicality in any bid submitted and to make such award as they deem most advantageous to the Town of Seymour. Suggest bidder contact the Road Supervisor if interested in viewing roads or for additional information about road improvement projects.