Renovation of a municipal facility in Toronto, Ontario. Completed plans call for the renovation of a municipal facility.

General: The scope of work includes, but is not limited to, the following: o Paint all surfaces in accordance with the Tender Documents, using only approved paint materials and colors as specified. o Paint both sides of all door and window frame surfaces. o Paint all previously painted surfaces to maintain consistency and uniform coverage, excluding the protection of elements, including but not limited to: o Light fixtures, fire and smoke detectors o Sprinkler heads o Non-prepainted diffusers and registers o Non-prepainted equipment o Fire rating labels and equipment specification plates o Finished surfaces o Nameplates o Door Hardware o Patch and make good all existing surfaces as required to achieve a uniform and continuous appearance. o Remove any loose or peeling paint from walls, floors, ceilings, and steps. Patch and repair any dents, cracks, or imperfections in walls. Prime and paint all walls, ceilings, and surfaces. o Protect all adjacent surfaces from paint splatters and drips. o Remove, salvage, store, and reinstall all signs, wall-mounted bulletin boards, washroom accessories, and other room accessories after painting. o Provide touch-up paint for future use by the Owner. o Document any changes or deviations from the original painting plan. o Remove all painting equipment and materials from the site upon completion. o Maintain cleanliness in corridors and common areas throughout the duration of the project, ensuring the building remains occupied and fully operational. o Remove all existing adhesive, caulking, and paint lines from the base of existing walls to accommodate the installation of new or reinstalled rubber base materials. Apply a skim coat as required. o Coordinate and manage the moving of furniture and equipment, including gym exercise equipment, following the completion of painting. This includes: o Safely removing, storing, and reinstating equipment to its original condition. o Ensuring all equipment is properly restored and securely reassembled to maintain user safety. o Arranging a third-party safety inspection. o Remove existing sealants and apply new sealants at all material junctions. Ensure that all junctions are properly cleaned and prepared before applying new sealants. Verify that all sealant materials are compatible with adjacent surfaces and meet project requirements. Deadline for Questions: Bidders shall submit questions to Project Management Office by: Date / Time: Thursday, April 10, 2025 by 12:00pm