Site work and paving for a road / highway in Greenville, North Carolina. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Thermoplastic Pavement Markings Project. The City of Greenville, NC (City), is in need of a contractor to install thermoplastic pavement markings at selected locations in Greenville, NC. Most of these markings will be installed over existing markings that are faded and in need of maintenance. There are some locations that will require removal. Questions about this bid should be directed to Stacey Pigford, Assistant Traffic Engineer 252.329.4678 or email atspigford@greenvillenc.gov. The contract term will be three (3) months with no extension Questions must be asked in writing via email addressed to Stacey Pigford at spigford@greenvillenc.gov with the ITB # 24-25-29 mentioned in the subject line of the email. All questions must be submitted by Wednesday, April 2, 2025 by 12:00 noon, and answers will be provided via an addendum posted on the City's website. The Contractor shall install HOT SPRAY and ALKYD-MALEIC thermoplastic markings in accordance with, and in conformance with the North Carolina Department of Transportation (NCDOT) Standard Specifications for Roads and Structures, and Amendments included elsewhere in this contract, NCDOT Roadway Standard Drawings, and the Federal Highway Administration (FHWA) Manual of Uniform Traffic Control Devices (MUTCD). The work covered by this special provision consists of marking the pavement surface with pavement markings to direct and control the movement of traffic and shall consist of remarking existing markings at locations specified herein. The Contractor shall furnish all services, labor, and equipment necessary for the required pavement preparation and pavement marking installation. Sufficient personnel experienced in the handling and application of the material shall be provided to assure work is done properly. The Contractor shall install the following markings with ALKYD-MALEIC thermoplastic. The items below will be measured in cost per each. 1. Left or Right Turn Arrows 2. Straight Arrow Symbols 3. Combination Straight Arrow and Left or Right Turn Arrow 4. Bike Symbols 6. Bike Sharrow Symbols 7. Speed Hump Chevrons 8. 24" Stop Bar/Crosswalk Lines The Contractor shall install the following markings with HOT SPRAY or ALKYD- MALEIC thermoplastic. The items below will be measured in cost per linear foot. 9. 12" Crosswalk Lines 10. 4" Yellow Center Lines 11. 4" White Skip Lines MBE (4%), WBE (4%) Questions must be asked in writing via email addressed to Stacey Pigford at spigford@greenvillenc.gov with the ITB # 24-25-29 mentioned in the subject line of the email. All questions must be submitted by Wednesday, April 2, 2025 by 12:00