Site work and paving for a road / highway in Norwich, New York. Completed plans call for site work for a road / highway; and for paving for a road / highway.

As of June 4, 2025, the project was awarded to James Bray Paving & Excavating, with an awarded amount of $744,031.44. Contractor shall coordinate and obtain any required permits with the NYSDOT for all work in DOT Right of Ways. Contractor shall coordinate and obtain any required permits with Chenango County Highway Department for all work in Chenango County Right of Ways. Each bid must be accompanied by security in an amount not less than five percent (5%) of the amount of the bid in the form and subject to the conditions provided in the Information for Bidders. No Bidder may withdraw his bid within forty-five (45) days after the actual date of opening thereof. The Owner reserves the right to waive any informalities or irregularities in the Bids received, or to reject any or all Bids without explanation, and to select the Bid, the acceptance of which, in its judgment, will best assure the efficient performance of the work. Bidders are advised that Labor and Material and Performance Bonds, each in the amount of 100% of the contract prices, as well as a Certificate of Insurance demonstrating required coverage, shall be provided by the successful bidder(s). In addition, the successful bidder(s) shall provide a one-year maintenance bond in the amount of 100% of the contract price at the completion of work. Technical questions are to be directed to Derrick Wilcox, at Delaware Engineering, D.P.C.'s Oneonta office; 55 South Main Street, Oneonta NY 13820, Phone: (607) 432-8073 Fax: (607) 432- 0432, Email: derrick@delawareengineering.com . The City of Norwich would also like to note that if the CHIPS program is cut or reduced by the State of New York, that quantities and/or portions of the project will also be reduced in order to stay within the allotted funds received by the City of Norwich. Note that part of the work under this project will be funded by the CHIPS/Pave NY/EWR program. The streets to be funded by this program are listed below as base bid and bid alternate work. BASE BID WORK: CHIPS/Pave NY/EWR FUNDED STREETS: 1. Barnes Street - (Marshall Street to Oleandorf Place) --- (Approximate total of 13,939 sq. ft. of milling and 195 tons of new HMA) 2. Conkey Avenue - (Locust Street to Elm Street) --- (Approximate total of 16,474 sq. ft. of milling and 231 tons of new HMA) 3. Conkey Avenue (Elm Street to South Broad Street) --- (Approximate total of 20,275 sq. ft. of milling and 284 tons of new HMA) 4. Delaware Square North - (RR to Delaware Square South) --- (Approximate total of 1,267 sq. ft. of milling and 18 tons of new HMA) 5. Delaware Square North - (Delaware Square South to Birdsall Street) --- (Approximate total of 5,544 sq. ft. of milling and 78 tons of new HMA) 6. Delaware Square South - (Entire Street) --- (Approximate total of 7,920 sq. ft. of milling and 111 tons of new HMA) 7. East Park Place - (East Main Street to North Broad Street) --- (Approximate total of 7,392 sq. ft. of milling and 103 tons of new HMA) 8. Howard Street - (Entire Street) --- (Approximate total of 30,492 sq. ft. of milling and 427 tons of new HMA) 9. Marshall Street - (East Main Street to Sheldon Street) --- (Approximate total of 12,672 sq. ft. of milling and 177 tons of new HMA) 10. Merrill Street - (Entire Street) --- (Approximate total of 14,256 sq. ft. of milling and 200 tons of new HMA) 11. Mitchell Street - (North Broad Street to Silver Street) --- (Approximate total of 35,693 sq. ft. of milling and 500 tons of new HMA) 12. Mitchell Street - (Silver Street to Park Street) --- (Approximate total of 40,920 sq. ft. of milling and 573 tons of new HMA) 13. N. Mitchell Street - (Entire Street) --- (Approximate total of 4,224 sq. ft. of milling and 59 tons of new HMA) 14. Park Street - (East Main Street to Mitchell Street) --- (Approximate total of 25,344 sq. ft. of milling and 355 tons of new HMA) 15. Sheldon Street - (Adelaide Street to Marshall Street) --- (Approximate total of 26,083 sq. ft. of milling and 365 tons of new HMA) 16. South Mitchell Street - (Entire Street) --- (Approximate total of 2,640 sq. ft. of milling and 37 tons of new HMA) 17. Sunset Drive - (Entire Street) --- (Approximate total of 57,024 sq. ft. of milling and 798 tons of new HMA) 18. Turner Street - (Entire Street) --- (Approximate total of 3,379 sq. ft. of milling and 47 tons of new HMA) 19. West Park Place - (Court Street to North Broad Street) --- (Approximate total of 8,131 sq. ft. of milling and 114 tons of new HMA) 20. City Hall Parking Lot - (Entire Parking Lot) --- (Approximate total of 21,000 sq. ft. of milling and 294 tons of new HMA) 21. Magistro Drive - (Remaining Area 20'x140' - 4,060sq. ft. of 6" Milling - 4" Binder - 2" Top) --- (Approximate total of 4,060 sq. ft. of milling and 172 tons of new HMA)