Site work for a water / sewer project in Del Monte Forest, California. Completed plans call for site work for a water / sewer project.

**As of July 1,2025, this project has not yet been awarded. A timeline for the award has not yet been established.** ** As of May 19,2025, this project has not yet been awarded. A timeline for award has not yet been established.** CONTRACT TIME: The Contract Time for Final Completion of all the Work is established at two hundred and forty (240) consecutive calendar days beginning with the date of the Notification to Proceed (NTP from the Owner. The contractor (System Integrator) is required to fabricate and deliver electric motor control panels, SCADA control panels, and furnish miscellaneous control and instrumentation equipment per attached Specifications (Exhibit D) and Drawings (Exhibit E). System Integrator is to accommodate multiple field mobilizations per Exhibit A-2. Field installation and programming shall be performed by others. An overview of related Scope of Work is presented below: 1.1 Motor Control (MC) Panels: o Submit shop drawings for review and approval o Fabricate panels per approved submittals o Perform factory testing o Ship and deliver panels to the PBCSD office o Perform on-site start-up and commissioning of panels 1.2 SCADA Control Panel: o Submit shop drawings for review and approval o Fabricate panels per approved submittals o Perform factory testing o Ship and deliver panels to the PBCSD office o Perform on-site start-up and commissioning of panels 1.3 Power Monitoring/ Flygt MAS Panel: o Submit shop drawings for review and approval o Fabricate panels per approved submittals o Perform factory testing o Ship and deliver panels to the PBCSD office o Perform on-site start-up and commissioning of panels 1.4 Miscellaneous Motor Control Equipment o Submit shop drawings, submittals for, and furnish miscellaneous control equipment as identified in in Drawings (Exhibit E) and Specifications (Exhibit D). o Ship & deliver miscellaneous control equipment to the PBCSD office o Perform on-site start-up and testing of controls 1.5 Instrumentation o Furnish instrumentation as identified in in Drawings (Exhibit E) and Specifications (Exhibit D), and furnish mounting supports or accessories as recommended by manufacturer. See Instrumentation Index (Exhibit D) for list of required instrumentation. o Ship & deliver instrumentation to the PBCSD office o Perform on-site start-up, calibration and testing of instruments