Renovation of a residential development in New York, New York. Completed plans call for the renovation of a residential development.

The contractor should be familiar with Greenheck and PennBarry roof fan manufacturing, or an equivalent roof fan manufacturer approved by NYCHA. Additionally, familiarity with Greenheck, ALDES, EFLOW, PRICE set of fire, volume damper, and grilles, or an equivalent manufacturer approved by NYCHA for fire, volume dampers and grilles, is essential. Vendor shall make best effort to match the roof fan manufacturer parts with the same manufacturing company (i.e., Greenheck with Greenheck and PennBarry with PennBarry) unless the fan is being replaced in its entirety. The work to be done under this Contract consists of repairing and replacing roof fans, replacing fire and volume dampers and vent cleaning, and providing all necessary personnel and labor, as more fully described in these Contract Specifications, which shall include, but not limited to: 1. Initial development site visits to establish individual development scopes of work. 2. Troubleshooting to determine repairs required for fan and verify power at each fan curb. 3. Replace fan parts such as motor, fan wheel, etc. 4. Using Borescope to identify the duct blockages or air drop. 5. Identify type of blockage material (wood, sheetrock, concrete, etc.) cause the blockage and estimate time for blockage clearance. 6. Vertical duct cleaning and clear blockage if there is any blockage or drop of CFM found. 7. Utilities fans maintenance. 8. Seal the top of riser to prevent air leakage into the riser. 9. Clean the existing backdraft damper, lubricate it, and ensure fully functional. Contract Term: 3 years from the award date on NYCHA's Purchase Order. NYCHA, in its sole discretion, shall have the option to extend the Term of this Contract for up to 2 one-year extensions. Bid Security: 100% of the Contract Minimum ($50,000). Payment & Performance Bonds: 100% of the Contract Minimum with a letter from the surety addressing potential contract increases to the non-guaranteed maximum. Question Deadline 04/30/2025 at 2:00 PM ET Only questions regarding this RFQ submitted to construction.procurement@nycha.nyc.gov (include RFQ number in subject field) prior to Question Deadline will be accepted. Question & Answer Release Date: 5/7/2025 ** pre bid info : Option 2: Call-in Audio, Dial-in by phone +1 646-838-1534,,77610155# United States, New York City Phone conference ID: 776 101 55#