Site work and paving for a road / highway in Muncy, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

**As of June 12, 2025, the project was awarded to New Enterprise, INC, with an awarded amount of $489,084.30.** Paving Contract: Furnish and place approximately 1,631 Ton of Asphalt Wearing Course 9.5 mm; 107 Ton of Asphalt Binder Course, 19.0 mm roadway Repair; 420 Ton of Asphalt Binder Course, 19.0 mm; 410 SY of roadway mill/excavation; Pennsylvania Prevailing Wage Rates Apply and are included with this contract. Seal Coat Contract: Furnish and place approximately: 58,573 SY of Asphalt Seal Coat (Single Application) w/CRS-2PM; 1,460 SY of Asphalt Seal Coat (Double Application) w/CRS-2PM; 795 SY of Asphalt Prime Coat w/Blotter; 7,354 SY Asphalt Skin Patching. Seal Coat Contract Modified Furnish and place approximately: 51,185 SY of Asphalt Seal Coat (Single Application) w/CRS-2PM 63,415 SY of Asphalt Seal Coat (Double Application) w/CRS-2PM; 44,457 SY of Asphalt Prime Coat (E-1) w/chips; 83,114 SY of Fog Seal for Asphalt Seal Coats; 27,833 SY of Asphalt Surface Treatment. Line Painting Contract: Furnish and place approximately 164,087 LF of 4" White Edge Lines; 250,214 LF of 4" Double Yellow Center Lines; 9,992 LF of 4" White Skip Lines. Cold In-Place Recycling: Perform approximately 11,244 SY of cold in-place asphalt recycling; furnish approximately 22,488 gals of CSS-1h emulsified asphalt; furnish approximately 28 tons of Portland cement; furnish and place approximately 1,012 of asphalt wearing course 9.5mm. Roadway Reclamation: Perform approximately 23,778 SY of roadway reclamation; furnish and place approximately 42,800 lbs of calcium flakes; Perform approximately 21,556 SY of E-1 Prime with stone blotter; Perform approximately 21,556 SY of Asphalt seal coat double application; and perform approximately 21556 SY of asphalt fog seal. Pennsylvania Prevailing Wage Rates Apply and are included with this contract. Proof of worker's compensation insurance will be required from the lowest responsible bidder. All work and material must meet current Pennsylvania Department of Transportation Specifications Form 408 and its Supplements. Proposals must be upon the forms furnished by the West Branch Council of Government. The COG reserves the right to reject any or all proposals.