Site work and paving for a road / highway in Atwater, California. Completed plans call for site work for a 185,650-square-foot road / highway; and for paving for a road / highway.

Scope of Work: The Work generally consists of a 1.5-inch pavement overlay located on Olive Ave between Winton Way and the city limits, including approximately 50 lineal feet of conform overlay paving on each intersecting street (unless intersection street has a valley gutter, then conform will stop at valley gutter). Work includes approximately 185,650 square feet of existing surfaced roadway or approximately 5,267 linear centerline feet of roadway, including side street conforms measured to the centerline of Olive Avenue. All roads included in the project are to be paved "current" to Caltrans standard specifications. The Work is described in more detail in the following paragraphs and shall be performed by the Contractor pursuant to current Caltrans standard specifications. All materials and construction methods shall conform to Caltrans Standard Specifications and all applicable material and performance standards therein referenced for hot mix asphalt and other bid items for the intended use and application. Material delivery shall conform to the recommended delivery standards and quality control regarding temperature of materials. The Contractor shall furnish all labor, materials, equipment, tools, incidentals, permits, services, and construction required to complete the Work, which includes mobilizing all required resources to complete the Work; providing temporary traffic control; providing erosion, sedimentation, and pollution control; removing existing pavement by wedge grind; removing existing pavement markers; removing existing traffic striping and pavement markings by grinding; disposing and/or recycling of all removed and excess materials; handling and disposing of any and all hazardous materials; repairing and filling existing pavement cracks, potholes, and boils; leveling low/depressed areas of existing pavement; replacing damaged traffic signal detector loops and lead-in cables; raising existing utility covers to finish grade; cleaning loose sand, dirt, debris, and other contaminants from existing pavement; applying asphalt binder tack coat and sealant; installing geosynthetic pavement fabric; placing and compacting 1.5" Type A HMA pavement overlay with 1/2" max. aggregate size; and replacing thermoplastic traffic striping and pavement markings, and pavement markers. The newly placed asphalt overlay shall tie in smoothly with the existing road surface and shall be applied to improve or correct any existing drainage issues. Contractor shall maintain the integrity of existing curbs, gutters, drainage inlets, culverts, or any drainage apparatus. Apply the "STOP" word marking and a stop bar line at all existing Stop signs, including where none currently exists. Contractor shall post notice of the project work schedule at all entrances to the Project work area at least one (1) week prior to commencement of any work. "NO PARKING" signs shall be posted at least 72 hours prior to beginning work. Contractor shall arrange for towing of cars, if necessary, in coordination with City. Traffic through the active construction zones shall not be delayed more than ten (10) minutes. One travel lane shall be maintained in each direction with a minimum width of 10 feet (10'). Temporary traffic markers shall be used where required and removed completely prior to completion of the Work. Trained flaggers shall be used when required. The project work area shall be cleaned daily of all construction debris, leaving the area safe and ready for traffic. Each bid must be accompanied by a certified check, cashier's check, or bidder's bond made payable to the CITY OF ATWATER for an amount equal to at least ten percent (10%) of the amount of bid, such guaranty to be forfeited should the bidder to whom the contract is awarded fail to enter into the contract. The Contractor must have a valid California license of Classification A - General Engineering Contractor, or C-12 - Earthwork and Paving, to perform this work. The successful bidder will be required to obtain a City of Atwater Business License at his/her own expense before execution of the contract. Bids must be on a unit price basis. All bids are to be compared on the basis of the CITY OF ATWATER'S estimated quantities of work to be done. Complete work within 30 working days. Digital copies of the plans and specifications (Adobe PDF file format) for this project are available upon request. Said digital copies are made available solely for the convenience of the prospective bidders (whether as a prime contractor or sub-contractor) on the Project, and are not considered part of the contract documents. No representation or warranty is made, either expressed or implied, with regard to the accuracy or suitability of said digital copies for any purpose whatsoever. Utilization or viewing of said electronic copies shall constitute implicit acknowledgement and acceptance of the provisions of this paragraph. Present bidders' inquires in writing to Justin Vinson at the City of Atwater, Public Works Department, 750 Bellevue Road, Atwater, CA 95301; email: jvinson@atwater.org. Prevailing wages are required on this Contract. The Director of the California Department of Industrial Relations determines the general prevailing wage rates. Obtain the wage rates at online. The CITY OF ATWATER reserves the right to reject any or all bid proposals and to waive any informalities or irregularities in any bid or in the bidding. Question Deadline 05/02/2025 at 5:00 PM PT Examine all of the various parts of these Documents if contemplating the submission of a bid, and should there be any doubt as to the meaning or intent of the Contract Documents, you must request an interpretation, in writing. Any interpretation or change in the Contract Documents will be made, in the form of addenda to the Documents and will be furnished to all Bidders receiving a set of the Documents. Addenda will be issued by Wednesday, May 7, 2025 at 5:00 pm Request for interpretation must be submitted in writing to: Justin Vinson City of Atwater Public Works Department 750 Bellevue Road Atwater, California 95301 Email: jvinson@atwater.org