Site work and paving for a bridge / tunnel in Atlanta, Georgia. Completed plans call for site work for a bridge / tunnel; and for paving for a bridge / tunnel.

Bridge Maintenance and Repair-District 6 The Contractor will be required to perform prep work, removal, installation and cleanup for Bridge Maintenance and Repair defined in this ITB. The Contractor shall supply labor, equipment, tools, means of transportation, traffic control, and incidentals to perform work in accordance to specifications, and to ensure a safe work environment for employees and the traveling public within the time schedule specified. 1. Scope Work under this ITB consists of furnishing all labor, materials, tools, equipment, means of transportation, and incidentals necessary to perform the services. Contractor must furnish equipment in good operating condition and operated by properly trained and qualified personnel. The Contractor must make a good faith effort to furnish the Department the fully operational equipment needed to perform Bridge Maintenance and Repair at such time, and at such location(s) as directed by the Engineer. Prior to start of work, Contractor must inspect equipment to ensure the equipment is fully operational for the performance of its intended purpose. The Contractor will also be responsible for any traffic control, licenses, and permits required to satisfy the duties required herein. When replacing PCC Slabs, the contractor is not allowed to remove the existing slab without being able to pour concrete within seven (7) calendar days of opening the road surface. -This project consists of Removal and Replacement of Approach Slab and Base, Repair Paving Rest, Flowable Fill, Resealing Bridge Joints, Mill/Inlay, Striping, and Removal of Bridge Parts at the location specified below and in the plans. Project Limits: The Project consists of two (2) Approach Slab Replacement on SR 6 in Polk County. The Project Limits begin on SR 6 at Mile Post 22.776 and end at Mile Post 22.887. This Contract is for the Bridge ID - 233-5070-0 (See Map). Polk County SR 6 MP 22.831 34.011066, -85.057502 Order of Completion: (1)Removal of Approach Slabs (2)Repair Paving Rest (3)Flowable Fill (if necessary) (4)Replace Approach Slabs and Bridge Joint (like kind) (5) Mill and Inlay to provide smooth transition (6)Permanant Striping Reporting: Crews SHALL keep records of daily work on all Canopy Clearing Operations. The daily work records shall be submitted with each invoice. The daily work report should include the following: o Crew Leader o Date of Work o County & Route o Location - Milepost to Milepost o Work Being Performed o Notate any other special conditions or situations that may arise while performing activities Deadline for Written Questions from Contractors 5/19/20252:00 PM Responses to Written Questions to Contractors 5/21/20255:00 PM Work must begin no later than: 30 Days After Prework Meeting Work must be completed no later than: 120 Days After Prework Meeting Bid Bonds or Proposal Guarantys are no longer required Performance and Payment Bond A Performance Bond and a Payment Bond each equal to 100% of the Award Price, must be provided by the successful Bidder. Further reserves the right to reject any or all bids, and to waive technicalities and informalities at its discretion. Only contractors deemed as Qualified Contractors to provide "Bridge Maintenance and Repair" through the routine maintenance prequalification process are eligible to participate in this Invitation to Bid/Request for Quote. Through this ITB/RFQ the Georgia Department of Transportation (hereinafter, "the State Entity, Department, Agency, or GDOT") is seeking bids for Bridge Maintenance and Repair. The qualified firms who have been awarded a Master Service Agreement (MSA) through the prequalification process #48400-410-000021912.