Renovation of a power facility in Jacksonville, Florida. Completed plans call for the renovation of a power facility.

Stage new batteries at or near project work site. Remove 121 ATT Round Cells - 365 lbs per. Send 120 ATT Round Cells to EPA certified smelter and provide JEA with certificate of delivery. Remove old battery racks. Install battery and rack in accordance with NEC Article 480.9 (C) & (D). IEEE 485 5.2 Mounting, IEEE 485 6. Installation Procedures IEEE 485 7. Records. Spill containment shall be secured under the racks. Battery straps and inter-tier DLO connecting cables shall be installed according to the manufacturers specification. After the new battery is connected, a freshening charge shall be performed according to manufacturers specifications. Capacity test shall be performed after the battery has been on float long enough according to manufacturer specification. Capacity test shall be conducted after the manufacturers recommended time on float. Capacity test time and type shall be approved by JEA. The capacity test shall be conducted with an Alber load bank with a BCT 2000 test module with the load bank positioned next door in the inverter room. The test parameters shall be approved by JEA Engineering. All documentation - serial numbers, lot number, manufacture date, acceptance test data, individual specific gravities, intercell and intracell resistance values shall be delivered to JEA in an easy to read and to understand format that is consistent, logical, and noncontradicting. The battery shall be delivered with a hydrometer intended for use with the battery. All work to be completed during the Unit 3 outage Currently scheduled 10/16-11/5 Question Deadline 06/04/2025 For more information, please contact the JEA Buyer: Victoria Holloway hollvl@jea.com The purpose of this solicitation for NGS - N03 Station Service Battery Replacement is to evaluate and select a vendor for the purchasing of new industrial batteries, services for removal and recycling of the old batteries, and the installation of the new batteries. additional pre bid meeting note: Safety PPE is required while on site at NGS. Hard hat, Safety glasses and Steel-toed boots. A picture ID is required for plant access along with a list of names of the attendees provided ahead of time to be added to Symmetry for visitor management. Those planning to attending, please send contact information to: hollvl@jea.com, 48 hours prior to the Pre-Response Meeting to have contact information documented.