Renovation of a fire / police facility in Grand Bay-Westfield, New Brunswick. Completed plans call for the renovation of a fire / police facility.

Reference Number 0000293608 Question Acceptance Deadline Jun 06, 2025 02:00 PM ADT Questions are submitted online Yes All enquiries and other communications from Bidders, regarding this ITT, must be submitted in writing through the BGIS MERX Portal no later than the date and time indicated in the Instructions to Bidders or as changed by Addenda Pricing Lump sum Full replacement of existing deteriorated asphalt shingles, on the multi-elevation roof assembly, is required at the RCMP detachment. The intent of the project is to protect the integrity of the structures & mitigate the risk of future damage to interior finishes. Supply all materials & labour necessary for new main building roof. Scope includes: remove/strip existing shingles, including fasteners & roofing membrane. Inspect eaves & fascia for replacement & inspect sheathing after removal of existing shingles. Ensure surface is firm & dry, without ridges, warps or voids & properly fastened. Any damaged sheathing is to be identified during demolition & BGIS Project Manager to be notified immediately in order to secure approval to replace damaged sheathing. Replace missing 'H' clips as necessary. Vent pipes & other accessories projecting through the roof must be in place & appropriate roof flashings installed prior to shingling. Installation of full waterproof underlayment (ice and water shield) is to be performed over the entirety of all roof surfaces prior to shingling occurs (as per client request). New asphalt shingles to match as closely as possible with existing. At eaves, use a starter course of shingles, tabs reversed, overhang 1/2". Install ridges & roof vents prior to shingling and nail as per manufacturer's directions. Shingles to be Architectural style, individually tabbed strip shingle, mineral surfaced asphalt with fiberglass felts having a 30 year manufacturer's warranty at a minimum. Eavestrough and downspouts in good condition. Contractor responsible to ensure existing heat trace is removed prior to construction and re-installed after construction. Official bid documents must be obtained from www.bgis.merx.com and bid submissions must be done through the Merx platform.