Renovation of an educational facility in Des Plaines, Illinois. Completed plans call for the renovation of a educational facility.

Oakton College Toilet Room Renovation Anticipated Award Date: August 19, 2025 1.1.1 Work Included: 1.1.1.1 Wherever possible throughout the Contract Documents, the minimum acceptable quality of workmanship and materials has been defined by manufacturer's name and catalog number, referenced to recognized industry and government standards, or description of required attributes and performance. 1.1.1.2 To ensure that the specified products are furnished and installed in accordance with design intent, procedures have been established for advance submittal of design data and for their review by the Engineer. 1.1.1.3 Make all submittals required by the Contract Documents, and revise and resubmit as necessary to establish compliance with the specified requirements. 1.1.1 Work Included: Throughout the construction the Project Engineer may require the Contractor to perform testing of various materials or installed items. The Contractor shall provide all material and assistance needed to perform inspection and testing required under pertinent other sections of these specifications. 1.1.2 Work included in this Section: The testing company must be approved by the Project Engineer. Hot Mix Asphalt nuclear density testing is required for all patching operations. It is anticipated that a testing company will need to be on-site for a few hours that day that patching operations are done. Plant testing of hot-mix asphalt materials will not be required (as long as the material is from an approved IDOT source). This testing shall be paid for by the contractor and is incidental to the pay items. A. General provisions of contract include the following: Bidding requirements, contract forms, provisions of contract, and Division 1. These provisions contain requirements which affect electrical work under Divisions 26, 27 and 28 and which must be complied with as a part of the work. B. Divisions 26, 27 and 28 are subdivided into various sections for general convenience. C. Provide items, articles, materials, operations and methods required by drawings and specifications including labor, equipment, supplies and incidentals necessary for completion of work in Divisions 26, 27 and 28. D. It is the intention of Divisions 26, 27 and 28 specifications and drawings to call for finished work, tested and ready for operation. E. Apparatus, appliance, material or work not shown on the contract drawings, but mentioned in the specifications, or vice versa, or any incidental accessories necessary to make the work complete and ready for operation, even though not specified or shown on the contract drawings, shall be furnished and installed without additional expense to Owner. F. Should there be any discrepancies or a question of intent, refer the matter to the architect for a decision before ordering any equipment or materials or before starting any related work.