Site work for a water / sewer project in Baggs, Wyoming. Completed plans call for site work for a water / sewer project.

Little Robber Detention Dam Reconstruction Site Visit: 10 July 2025 / 10AM Local Time (See clause instructions below / FAR 52.236-27) Bids Submission Information: o Questions Due Date: 14 July 2025 / 2PM Mountain Time o Bids Due Date: 31 July 2025 / 2PM Mountain Time o Virtual Bids Opening Date/Time: 04 August 2025 / 10AM Mountain Time FAR Magnitude: $1M - $5M *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Question Deadline 07/14/2025 at 2:00 PM MT RFI is to be emailed as an editable attachment to the contracting point of contact The work covered by this specification is the furnishing of labor, materials, and equipment for installing, maintaining, and operating traffic control devices to ensure the safety of the general public and project personnel. The work covered under this section includes items required in the final closeout of this Project. Included are itemssuch as post-construction inspection, acceptance of the work, closeout records, and Project record drawings This work consists of furnishing and placing a geotextile fabric as a permeable separator between dissimilar materials, such as between subgrade and riprap bedding or gravel, permanent erosion control measure, sediment control device, or subsurface drainage fabric, and to aid in stabilizing poor subgrade soils. Definition: Metal fabrications include items made from iron and steel shapes, plates, bars, strips, tubes, pipes and castings which are not a part of structural steel or other metal systems specified elsewhere. Types of work in this section include metal fabrications for: 1. Inlet structure steel grating trash rack and channels 2. Inlet slide gate mounting plate. 3. Steel staff gage. 4. Steel vent pipe 5. Steel deflector plate and support ring at conduit inlet 6. Rough hardware 7. Loose bearing and leveling plates 8. Loose steel lintels 9. Miscellaneous framing and supports