Site work and new construction of a water / sewer project in Crosby, Texas. Completed plans call for the construction of a water / sewer project; and for site work for a water / sewer project.

Lone Wolf Water Treatment Plant The Project consists of the Construction of a Water Treatment Plant to be owned by ELHMD. Question Deadline 08/29/2025 All questions about the meaning or intent of the Bidding Documents are to be submitted to Engineer in writing. Questions received less than three days prior to the date for opening of Bids may not be answered. The Work to be performed under the provisions of these Contract Documents consists of furnishing all materials, equipment, tools, transportation, services, labor, and supervision necessary for construction of facilities and installation of any and all equipment together with appurtenances for the work covered by these specifications. The work which shall consist of drilling and developing the East Lake Houston Management District, Lone Wolf Water Plant Well No. 1. Well No. 1 shall consist of 400 feet of 10-inch steel casing cemented to 370 feet with 150 feet of 10-inch pipe-based stainlesssteelscreen on 10-inch perforated steel pipe and 10 feet of 10-inch steel blank set within a 16-inch gravel packed bore. The well shall be equipped with a 1,000 gpm, 100 H.P. submersible pump set with 377 feet of 8- inch steel column pipe. The project includes all site work necessary for well construction, including but not necessarily limited to clearing and grubbing and brush disposal; grading; and drainage ditching. Each well shall be suitable in all regards for use as a public water supply. The wells shall conform to all regulatory requirements for such facilities. The wells shall be constructed and completed in accordance with the provisions of AWWA A100-20 or latest version and the specifications included herein. After completion of drilling and test pumping, the Driller shall remove all equipment and materials and make appropriate adjustments to the height of the surface conduit, casing and liner. The Driller shall pour the seal slab and complete the well head. The seal slab shall extend to the top of the casing cement. All material and equipment used in the construction of the wells shall not contain more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes, pipe fittings, plumbing fixtures and fixtures and meet standards of NSF 61. All newly installed pipes and related products must conform to American National Standards Institute/NSF International (ANSI/NSF) Standard 61 and must be certified by an organization accredited by ANSI. All plastic pipes for use in public water systems must also bear the NSF International Seal of Approval (NSF-pw). The Contractor shall comply with all State, County, and Groundwater Conservation District rules.