Site work for a civil project in Frankston, Texas. Completed plans call for site work for a water / sewer project.

This project consists of, but is not limited to, the following: Reconstruct plant control building with chlorine room including concrete foundation and electrical improvements, replace two (2) booster pumps and disinfection system, two (2) hatches and vent systems on existing in ground storage tanks, pressure tank with foundation, liquid level indicator on the ground storage tanks, and chemical injection system, related plant piping, fittings, valves and bypass line, and all associated appurtenances. Question Deadline 08/28/2025 No oral interpretations will be made to any bidder. Each request for clarification shall be made in writing to the Grant Recipient or engineer A bid bond in the amount of 5 percent of the bid issued by an acceptable surety shall be submitted with each bid [for those contracts that exceed $100,000]. A certified check or bank draft payable to the City of Frankston or negotiable U.S. Government Bonds (as par value) may be submitted in lieu of the Bid Bond. The City of Frankston reserves the right to reject any or all bids or to waive any informalities in the bidding. Install new 15,000 Gallon Pressure Tank(including concrete cradle foundation with spread footings and drill shafts), Replace the existing two booster pumps with two new booster pumps , Recoat exterior of the two Existing Underground Storage Tanks, Install two Liquid Indicators on each Underground Storage Tank, Re-grade surface around Well 2, add chemical injection system (corrosion inhibitor), repair waterline leak in chlorine room, Replace Existing Roof Hatches and Vents on Underground storage tanks roof, and add a canopy to existing booster pump building to shade chlorine cylinders PWS:TX0010002 RN: 101391142 Each bidder should visit the site of the proposed work and should become acquainted with the existing conditions and facilities, the difficulties and restrictions pertaining to the performance of the contract. The bidder should thoroughly examine and become familiar with the drawings, technical specifications and all other contract documents.