Renovation of a residential development in Leonard, Texas. Completed plans call for the renovation of a residential development.

ALL DOCUMENTS LISTED BELOW ARE REQUIRED FOR A RESPONSIVE BID: All bidders are required to furnish general liability insurance and three project references . After the bid is awarded, the contractor will be required to provide a performance bond before work can begin. Failure to submit will be considered a non-responsive bid. Texoma Housing Partners reserves the right to reject any or all bids and waive any informality in the bidding. *Project information, including timeline and contacts, has been obtained through public sources. The content management team continues to pursue additional details; however, the contact(s) listed have yet to disclose or confirm any information. Inquiries should be directed to the contact(s) listed. Building Addresses 204 E. Collin – 27 & 28 206 E. Collin – 29 & 30 208 E. Collin – 31 & 32 300 E. Collin – 33 & 34 302 E. Collin – 35 & 36 304 E. Collin – 37 & 38 306 E. Collin – 39 & 40 305 E. Collin – 41 & 42 303 E. Collin – 43, 44, 45, & 46 209 E. Collin – 47 & 48 207 E. Collin – 49 & 50 ProjectDescription Texoma Housing Partners is accepting bids for Roof Replacement on the Leonard Housing Addition in accordance with the following specifications. Specifications include obtaining any permits needed through the city, tearing off one layer of metal and two total layers of shingles and felt, removing 2x2 metal drip edge, all metal pipe jacks and gas vents from Units 27-50 (11 buildings). Replacing any bad decking (a separate bid component), installing 30-year architectural shingles (color- Weatherwood), new synthetic felt, new metal base pipe jacks, new metal gas vent pipe jacks, new storm collars, and new gas vents. Installing new power pole split boots on buildings with power coming through the roof, new drip edge, and ice and water shield in the valleys on E. Collin. Replacing any relief vents. 1 cnails are required with a minimum of 5 nails per shingle. Painting all pipe jacks and gas vents to match shingle color. Cleaning up and hauling off all metal, old shingles and trash. All areas must be thoroughly rolled with a magnet to pick up all nails. All contractors will be responsible for checking that gas vents are properly installed in the units after removing the pipe jacks and gas vents