Site work for a communication facility in Andrews Air Force Base, Maryland. Completed plans call for site work for a communication facility.

The project involves the removal of existing copper infrastructure and its replacement with fiber optic cabling in Building 1405. Amendments have been issued to extend the deadline for Request for Quotations to 9 September 2025 and to incorporate a Questions and Answers document along with a Building 1405 Dimensions document. Location: Building 1405, Joint Base Andrews, 1500 Perimeter Rd, Andrews AFB, MD 20762, United States. Purchase of Removal and replacement of existing Copper infrastructure with Fiber Optic cabling in Bldg 1405. CIPS WO#:96TW-2024-00177.v2 Customer wants to upgrade current network infrastructure from copper to fiber: 56 (32-Green and 24-Red) LAN drops. 1.0.0 Specific Task Objectives Contractor shall perform to the following: Room 101 (Cable Tray/Raceway): 1.0.1 All existing CAT6 cables in work area shall be removed from the work area outlets back to the patch panel. 1.1.1 Fiber optic cables shall be installed within the existing raceway. Note: Contractor shall not install RED color OM3 fiber optics cabling above ceiling. 1.1.2 Contractor shall replace any damaged raceway sections and install/extend any sections that are required to meet customer requirements and TEMPEST requirements. 1.1.3 Newly installed raceway shall match existing raceway color as close as possible. I.E. 1.1.4 If existing raceway is Electric Ivory, contractor shall not install International White colored raceway. Room 101 (Green Network): 1.2.1 Install 16-total Green color OM3, 4-strand, MM Plenum fiber optic tight buffered or MIC indoor cable(s). 1.2.2 Terminate FO cable in cabinet/rack-mounted patch panels, and at the outlet using LC type connectors. Note: Contractor shall provide and install new wall-mount cabinet with locking swing handle accepts hasp lock. 1.2.2.1 Cabinet Mod#/Description: GL24WDXS-B-SH-AF/ 24"H x 24"W x 32"D Wall Mount, Usable depth 28", 11 RMU, Solid Door, Fans, Weight capacity 250 lbs. 1.2.2.2 Lock Mechanism Mod#/Description: Ch-03/ locking swing handle accepts hasp lock 1.2.2.3 Contractor shall ground new cabinet to code. 1.2.3 Downward sloped 4 port face plates with label windows shall be used. Reference provided Floor Plans for drop locations. 1.2.4 A minimum of two duplex connectors shall be provided for each work area. 1.2.5 If work-area outlet/device box already exists in location, only the faceplate shall be replaced with a downward sloped style where required. additional site visit note: The Contractor shall provide the contracting specialist with the following: Name of Individual, DOB, SSN, Drivr's License #/State. This information shall be emailed or communicated by phone to the Contracting Specialist. The Base Access Request will then be submitted to Security Forces by the Contract Specialist. Security Forces will perform a background check on all contractors visiting Eglin AFB for the site visit. Contractor shall possess a picture ID at all times on Eglin AFB. If you have any questions pertaining to this matter, please contact A1C Emily Newton, Contract Specialist, at (850) 565-9055. When sending emails to the Contracting Specialist, please check your email's options for 'obtaining a delivery receipt' to allow verification of the email being delivered. The access for this form should only be for Eglin AFB, FL, Building 1405, 27 August 2025, from 10:00 a.m. to 11:00 a.m. CST. All offeror/contractor personnel are required to notify, via telephone or email, the Contracting Specialist if planning on attending the site visit. If you have any questions pertaining to this matter, please contact A1C Emily Newton, Contract Specialist, at (850) 565-9055, emily.newton.1@us.af.mil