Site work for a civil project in Cardington, Ohio. Completed plans call for site work for a water / sewer project.

As of November 06, 2025, this project has not yet been awarded. A timeline for the award has not yet been established. The Project Includes the Following Work: A New Sludge Dewatering Building Including Rotary Press, Sludge Feed Pump, Sludge Belt Conveyor, Polymer Feed System, Air Compressor, Booster Pump Skid, Receiving Conveyor, Piping, Electrical & Instrumentation Work, Mechanical and Plumbing Work, Scada System Improvements, Digester Piping Improvements and Sludge Drying Bed Improvements. The Project Has an Expected Duration of 260 Working Days. Bids Shall Be Accompanied by a Bid Guaranty Bond for the Full Amount (100%) of the Bid, in Favor of the Owner or a Certified Check, Cashiers Check, or Letter of Credit Pursuant to Chapter 1305 of the Ohio Revised Code, in the Amount of 10% of the Bid, Payable to the Owner. Instructions to Bidders. The Owner Reserves the Right to Reject Any and All Bids, to Waive Any Informalities in the Bids Received, and to Accept Any Bid Which It Deems Most Favorable. IMPROVEMENTS TO THE EXISTING CARDINGTON WASTEWATER TREATMENT PLANT (WWTP) TO CONSTRUCT A NEW BUILDING THAT HOUSES A SLUDGE DEWATERING SYSTEM THAT INCLUDES A ROTARY FAN PRESS INSTALLED IMMEDIATELY UPSTREAM FROM THE EXISTING SLUDGE DRYING BEDS. Question Deadline 10/03/2025 Questions received less than seven days prior to the date for opening of Bids may not be answered Bidder shall submit all questions about the meaning or intent of the Bidding Documents to Engineer through Bid Express or the Engineer's email as provided The project consists of the construction of a new sludge dewatering building and modifications to the existing digesters and sludge drying beds: 1. New Sludge Dewatering Building a. CMU Block Building b. Rotary Dewatering Press and Flocculator c. Sludge Feed Pump d. Belt Conveyor e. Screw Conveyor f. Polymer Feed System g. Air Compressor h. Booster Pump Skid i. Mechanical HVAC work j. Electrical & Instrumentation Controls work k. Plumbing work (potable water, trench drains, sink, eyewash etc.) 2. Existing Sludge Drying Beds a. Demolition as shown on Bid Drawings b. Installation of sludge cake conveyance piping 3. Installation of new sludge feed pump suction piping in the digesters with isolation valves. 4. Site work includes yard structures, site piping, site electrical, site grading and access drive work. 5. SCADA System Improvements 6. Electrical work in the headworks electrical room to feed the new sludge building 7. Gas line work to feed the new sludge dewatering building