Site work and paving for a road / highway in Ellabell, Georgia. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Contractor will be required to perform prep work, removal, installation and cleanup for Concrete and Portland Cement Concrete (PCC) Pavement Rehabilitation Services defined in this ITB. The Contractor shall supply labor, equipment, tools, means of transportation, traffic control, and incidentals to perform work in accordance to specifications, and to ensure a safe work environment for employees and the traveling public within the time schedule specified Work under this ITB consists of furnishing all labor, materials, tools, equipment, means of transportation, and incidentals necessary to perform the services. Contractor must furnish equipment in good operating condition and operated by properly trained and qualified personnel. The Contractor must make a good faith effort to furnish the Department the fully operational equipment needed to perform Concrete and Portland Cement Concrete (PCC) Pavement Rehabilitation Services at such time, and at such location(s) as directed by the Engineer. Prior to start of work, Contractor must inspect equipment to ensure the equipment is fully operational for the performance of its intended purpose. The Contractor will also be responsible for any traffic control, licenses, and permits required to satisfy the duties required herein. When replacing PCC Slabs, the contractor is not allowed to remove the existing slab without being able to puor concrete within seven (7) calendar days of opening the road surface. The project includes slab replacement on SR 404/I-16 in Bryan and Bulloch Counties, from MP 146.92 to MP 111.48. Both temporary and permanent striping will be required where existing is damaged. The striping shall match existing patterns. The Department reserves the right to modify existing provisions or include additional provisions, which are not currently addressed herein and further reserves the right to reject any or all bids, and to waive technicalities and in-formalities at its discretion. Question Deadline 09/19/2025 at 2:00 PM Deadline for Written Questions from Contractors Work must be completed no later than: 180 Days After Prework Meeting