Renovation of an educational facility in Waterloo, Ontario. Completed plans call for the renovation of a educational facility.

Reference Number 0000302979 Pricing Lump sum Question Acceptance Deadline 2025/10/06 05:00:00 PM EDT 1 Installation of heat pumps: .1 Equipment and System Manufacturer's Certification: .1 When equipment/system installation is complete, but prior to start-up procedures, arrange and pay for the equipment/system manufacturer's authorized representative to visit the site to examine the installation, and when any required corrective measures have been made, to certify in writing to the Consultant that the equipment/system installation is complete and in accordance with the equipment/system manufacturer's instructions. .2 Equipment and System Start-Up: .1 When installation of equipment/systems is complete, but prior to commissioning, perform start-up for equipment/systems as specified in mechanical work Sections in accordance with the following requirements: 2 submit a copy of each equipment/system manufacturer's blank start-up report sheet to the Consultant for review, and incorporate any comments .3 under direct on-site supervision and involvement of the equipment/system manufacturer's representative, start-up the equipment/systems, make any required adjustments, document the procedures, leave the equipment/systems in proper operating condition, and submit a complete set of start-up documentation sheets signed by the manufacturer/supplier and the Contractor .3 Commissioning: .1 After successful start-up and prior to Substantial Performance, commission the mechanical work in accordance with requirements of CSA Z320, Building Commissioning. Use commissioning sheets included with the CSA Standard, and any supplemental commissioning sheets required. Submit final commissioning data sheets, TAB reports, project closeout documents, and other required submittals. .4 Demonstration and Training: Refer to the article entitled Equipment and System O & M Demonstration & Training in the Mechanical Work General Instructions Section. Include for 8 hours of on-site operation demonstration and training for 2 groups of 6 people. Documents can be obtained from https://uwaterloo.bonfirehub.ca/