Site work and new construction of a communication facility in Powder Springs, Georgia. Completed plans call for the construction of a one-story above grade communication facility.

Cobb County is seeking the services of an architectural/engineering firm to provide all design services for the construction of a new E-911 Emergency Communications Center. The selected firm will be responsible for developing plans and specifications, and providing complete program verification, schematic design, design development, and construction documents. The Design Professional will be required to contract with the Owner in a timely manner. Question Deadline 10/14/2025 at 5:00 PM ET Generally, the Scope of Work for this project will include performance of professional consulting, architectural and/or engineering services as needed and requested in writing by the Owner, including but not limited to: Generally, applies to all phases: 1. Meeting with Government Project Manager at intervals appropriate to the project phase 2. Develop/update project budgets. 3. Develop/update project schedules. Pre-Design & Schematic Design: 1. Determine/confirm existing building code and classification for proposed works. 2. Determine project objectives with the Department. 3. Establish functional and aesthetic goals to formulate into a design concept. 4. Review and amend the current floor plans, sections and elevations provided. 5. Present the new conceptual design to the Government Project Manager for approval and acceptance. Design Development: 1. Design floor plans, sections, elevations, site plan etc. 2. Prepare all specifications and detailed drawings. 3. Make provisions for Safety and Health requirements. 4. Material finishes, furnishings, fixtures, and equipment; shall be reviewed and approved by Gov. Project Manager and Stakeholders 5. Prepare final interior floor plans, sections and elevations drawings. 6. Submit drawings to the Department of Planning Construction Documents: 1. Power and communications drawings and specifications 2. Reflected ceiling and lighting plans. 3. Wall and floor finishes plans and schedules. 4. Interior door and hardware schedules 5. Interior window and hardware schedules 6. HVAC drawings and specifications 7. Furniture layouts 8. Interior details and design as required, including cabinets, millwork, etc. 9. Security and Access Control system drawings and specifications 10. Complete all related specifications. 11. Seek approval from Authorities Having Jurisdiction. Ensure Permit Approval is met. 12. Ensure designs are in compliance with local and international codes of practice and standards. As per Adda 1, Any questions concerning this RFP must be submitted to the portal prior to 5:00 pm on Tuesday, October 14, 2025.