Renovation of a municipal facility in Washington, District of Columbia. Completed plans call for the renovation of a municipal facility.

The project will replace the existing fire alarm system panels in the Rayburn House Office Building (RHOB) with new addressable voice-type fire alarm system panels, as well as associated activities, including architectural, electrical, fire protection, miscellaneous modifications, and hazardous material remediation. The work will not be a whole fire alarm system replacement, but rather only a head-end equipment replacement. New fire alarm panels will be located in Room G3-23 which will be dedicated to the fire control equipment and designated as Fire Command Center. The system will be zoned to correspond to a reasonable construction phasing plan. The actual construction phasing plan will be developed by the installing contractor and approved by the AOC. The contractor will disconnect all existing circuits from the existing fire alarm system panels and reconnect to the new addressable voice-type fire alarm system panels. Disconnecting individual visual notification circuits is not needed since complete NAC panels are being reused and connected to new fire alarm control panel. Following acceptance of the new system, the existing system will be demolished. Existing Autocall Transponder Cabinet (ATC) enclosures are to remain as terminal interface cabinets. All Autocall control equipment shall be disconnected and removed from these enclosures and turned over to the AOC. Value: $ 5,000,000 - $ 10,000,000 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Contact the GC bidder(s) for access to all documents.