Demolition and renovation of a transportation facility in Tulsa, Oklahoma. Completed plans call for the renovation of a one-story above grade transportation facility.

Project no- 2024-289-00 , FSB2024-289-00 Provide all material, labor, supervision, tools, equipment, and incidentals necessary to demolish and build out public restrooms per bid specifications and design drawings at Tulsa International Airport. Bidders must have the required personnel, equipment, and materials under their direct control or at their disposal to execute the project work as specified. Bids must be accompanied by a certified or cashier's check, contractor's bid bond, or irrevocable letter of credit for not less than five percent of the bid. If awarded the contract, the successful bidder must furnish general liability and workmen’s compensation insurance, and performance, statutory, and maintenance bonds for one hundred percent of the contract price. All affidavits, certifications, and bonds included in the bid documents must be executed at the time of bid. Disadvantaged Business Enterprise (DBE) requirements apply, with an aspirational DBE goal of 5%, and the project is funded in part by a grant from the Federal Aviation Administration. Bidders must comply with relevant federal, state, and local requirements, including but not limited to DBE participation, trade restriction certification, federal labor standards, and anti-discrimination provisions. TAIT reserves the right to reject any or all bids and waive minor technicalities. Intent of Contract. The intent of the contract is to provide for construction and completion, in every detail, of the work described. It is further intended that the Contractor shall furnish all labor, materials, equipment, tools, transportation, and supplies required to complete the work in accordance with the plans, specifications, and terms of the contract. 40-02 Alteration of Work and Quantities. The Owner reserves the right to make such changes in quantities and work as may be necessary or desirable to complete, in a satisfactory manner, the original intended work. Unless otherwise specified in the Contract, the Owner’s Engineer or RPR shall be and is hereby authorized to make, in writing, such in-scope alterations in the work and variation of quantities as may be necessary to complete the work, provided such action does not represent a significant change in the character of the work. For purpose of this section, a significant change in character of work means: any change outside the current contract Scope of Work; any change (increase or decrease) in the total contract cost by more than 25%; or any change in the total cost of a major contract item by more than 25%. Work alterations and quantity variances not meeting the definition of significant change in character of work shall not invalidate the contract nor release the surety. Contractor agrees to accept payment for such work alterations and quantity variances in accordance with Section 90, paragraph 90-03, Compensation for Altered Quantities.